Si të instaloni dritat e dritave?
Në artikullin e sotëm, ne do të përqendrohemi në mënyrën e instalimit të fenerëve në një automjet. Për më tepër, ne nuk do të injorojmë disa pika që lidhen me rregullat për instalimin e tyre (sipas SDA GOST 8769-75) dhe kërkesave për to (certifikata e konformitetit sipas Rregullores së UNECE Nr. 19).
përshkrim
Qëllimi kryesor i dritave të mjegullës është krijimi i ndriçimit optimal të shtegut gjatë mjegullës, borës së fortë dhe shiut. Gjithashtu të rregulluara dhe instaluar siç duhet, ato përdoren për të ndriçuar anët e rrugës ose në vend të rrezes së zhytur
Mjetet
Para së gjithash, ne blejmë një seri dritash mjegulle, e cila përbëhet nga:
- dritat e mjegullës;
- litarët dhe terminalet e nevojshëm për to;
- stafetë 4-pinësh;
- ndërprerës;
- siguresa në distancë.
Nga mjetet, duhet të bartni sa më poshtë:
- kaçavida (Phillips dhe të sheshta);
- çelësat në 8 dhe 10;
- pincë;
- ne gjithashtu marrim disa lidhës ndihmës, disa kapësa dhe montime të ndryshme;
Pas kësaj, ne përsëri verifikojmë sigurinë e kompletit të blerë dhe vazhdojmë në hapin tjetër - instalimin.
instalim
Para së gjithash, ne de-energjizojmë plotësisht baterinë, duke eliminuar kështu edhe mundësinë më të vogël të ndonjë qarku të shkurtër. Tjetra, ne shqyrtojmë makinën për problemet mekanike që mund të shfuqizojnë të gjithë punën. Disa ekspertë rekomandojnë që të planifikoni përpara për rrugën tjetër të instalimeve elektrike.
Për lehtësi, i gjithë procesi mund të ndahet në disa faza: montimi në parakolp, instalimi i një butoni specifik në pultin e makinës dhe lidhja përfundimtare.
Montimi i parakolpit
- Ne heqim nga parakolpin vinçin që kryen funksionin mbrojtës dhe, në përputhje me rrethanat, vetë parakolpin.
- Pasi të hiqet, do të shohim prerje speciale për fenerët - si rregull, ato mbyllen me priza.
- Ne nxjerrim fenerët nga paketimi dhe i instalojmë në këto kamare.
- Tjetra i rregullojmë ato me vida.
- Pas kësaj, ne tërheqim litarët nga poshtë kapuçit dhe i bashkojmë me kapëse.
- Litarët "minus" janë të lidhur me trupin e makinës.
- Pasi të përfundojë kjo, ktheni kavilje dhe parakolp në pozicionin e tij origjinal. Gjëja kryesore nuk është që të nxitoni dhe të lidhni litarët në prizë direkt në fenerët. Ne shtrinim anën tjetër të kordonit brenda makinës.
Instalimi i ndërprerësit
- Hapni panelin dhe rreshtin e tastierës në qendër të vendosur nën timon. Ne nuk i shpërfillim përbërësit e tjerë që mund të shkaktojnë bezdi gjatë instalimit. Nëse është e nevojshme, përkohësisht shpëtoj prej tyre.
- Pas kësaj, ne heqim prizën nga butoni i pakontrolluar dhe lidhim litarët e kontaktit me të.
- Warning! Në disa raste, disa probleme ishin fikse kur lidhni një komponent të ri në një qark elektrik ekzistues.
lidhje
- Pas hapjes së kutisë së siguresave, lidhni terminalin përmes butonit të fillimit të dritës së përparme në një stafetë të përshtatshme (85).
- Tjetra, lidhni terminalin e kordonit të errët në stafetë, dhe anën tjetër me trupin e makinës.
- Ne e lidhim terminalin me 2 litarë në kamaren 87, dhe çezmat në lidhësit e siguresave specifike.
- Pas kësaj, ne nxjerrim parzmore të vendosura në kapuç dhe lidhim terminalet në lidhësit e dytë të siguresave.
- Mos harroni se në lidhësin 30 lidhim terminalin e kordonit të kuq, duke përdorur një lidhës për këtë. Dhe për kutinë e siguresave vendosni 1 stafetë dhe 2 siguresa.
- Pas kësaj, ne kontrollojmë përsëri, lidhemi me baterinë dhe fillojmë makinën.
Rregullat e instalimit dhe kërkesat e dritës së mjegullës
- Instalimi i dritave të mjegullës është i detyrueshëm vetëm për automjetet që përdoren në rrugët turistike ose në zonat malore.
- Numri i lejueshëm i PTF-ve për instalimin e përparëm është 2.
- Ngjyra e emetuar nga një fener dritë nuk duhet të ndryshojë në asnjë mënyrë nga tjetra, por nuk duhet të shkojë përtej intervalit të spektrit të bardhë ose selektivisht të verdhë.
- Dritat e mjegullës duhet të jenë të dukshme në aeroplanët e ndryshëm për këndin minimal të lejueshëm të shikimit.
- Asnjë nga hapjet PTF nuk duhet të vendoset më lart se hapja në rrezen e zhytur.
- Dhe së fundi, vlen të përmendet se vetëm ato fenerët që mbajnë shenjën zyrtare, të përbërë nga një rreth me shkronjën E dhe numrin vijues të vendit, ia vlen të blihen.
- Mbajini shpërndarësit gjithmonë të pastër, pasi ato do të ulin nivelin e dritës nëse janë të ndotura.
- Dritat e mjegullës nuk duhet të lahen me ujë (borë). Vetëm lustrim lejohet. Kjo mund të bëhet në çdo punëtori.
- Gjithmonë është e nevojshme të ruani llambat rezervë dhe siguresat në ndarjen e pasagjerëve.
Tani ju e dini se si të instaloni foglat. Nëse ndiqni me kujdes udhëzimet e propozuara, atëherë nuk duhet të ketë probleme.
Shumica e shoferëve e kuptojnë se sa të rëndësishëm janë dritat e mjegullës. Në ditët e sotme, ato janë shumë të rëndësishme, pasi ndryshimet minimale në kushtet meteorologjike mund të dëmtojnë seriozisht dukshmërinë në rrugë. Për të siguruar sigurinë maksimale të trafikut, është e nevojshme të blini pajisjet e nevojshme, të gjeni mjetet e duhura, si dhe diagramin e lidhjes së llambave të mjegullës.
Mund të blini dritat e mjegullave në një nga shitësit lokale të makinave ose të përdorni shërbimet e dyqaneve në internet. Vlen të përmendet se në shumë raste zgjidhja më e mirë do të ishte instalimi i fenerëve të rregullt, të cilat mund të gjenden përmes përfaqësuesit zyrtar të prodhuesit të makinës suaj. Në këtë rast, dritat e reja të mjegullës do të kombinohen në mënyrë harmonike me elementët e tjerë të pjesës së përparme të makinës. Përfshirë me optikë të tillë, si rregull, furnizohet një skemë e lidhjes së llambave të mjegullës.
Pse duhen dritat e dritave të dritave
Qëllimi kryesor i optikës së mjegullës është sigurimi i furnizimit më të saktë të dritës. Kjo mund të ndikojë ndjeshëm në nivelin e ndriçimit të sipërfaqes së rrugës. Nëse i vendosni dritat e dritave të dritave, mund të ndriçoni rreth 10 metra rrugë, gjë që është e mjaftueshme për ngarje në kushte të dukshmërisë së pamjaftueshme (me shpejtësinë e duhur).
Lexoni më shumë rreth asaj se si kryhet, lexoni në artikullin tonë.
Vlen të përmendet se është më mirë të rregulloni fenerët menjëherë pasi ato të instalohen në makinë. Ne ju këshillojmë që t'i kushtoni vëmendje të mjaftueshme kësaj çështjeje, pasi siguria juaj varet nga rregullimi i duhur i dritave të mjegullave!
Instalimi dhe lidhja e dritave të mjegullës
Lidhja e dritave të mjegullës nuk është aspak e vështirë. Ju duhet të keni aftësi themelore në përdorimin e mjetit të duhur, si dhe të kuptoni se ku ndodhen përbërësit kryesorë të makinës. Përndryshe, ne ju rekomandojmë të përdorni ndihmën e një profesionisti.
Për të instaluar dritat e foglave, duhet të përgatitni:
- dritat e mjegullës;
- stafetë dhe llamba e mjegullës;
- siguresa 15A;
- shirit izolues;
- tel;
- mjegull e butonit të energjisë.
Procedura e lidhjes së dritës së mjegullës duket si kjo:
- Së pari, hiqni panelin qendror në ndarjen e pasagjerëve. Nën atë, ju duhet të gjeni llamba prapa dritës për kontrollin e ngrohësit. Ju duhet të gjeni lidhësin 2-pin me të cilin duhet të lidhni kontaktin e parë me stafetën e llambës së mjegullës.
- Ne e lidhim telin e parë me lidhësin e lartpërmendur, dhe e dyta është e lidhur me foglat e butonit të energjisë.
- Ne e lidhim telin me stafetën, si rezultat i së cilës do të formohet një qark elektrik, voltazhi i të cilit do të jetë 12 V. Ai do të lidhë dimensionet e makinës dhe kontaktin e 85-të të stafit. Siç mund ta shihni, lidhja e një stafetë të llambës së mjegullës është një procedurë shumë e thjeshtë.
- Ne e lidhim kontaktin e 87-të të stafit duke shtrirë kabllon nën pedale në bateri. Mos harroni të instaloni një siguresë, dhe kjo duhet të bëhet sa më afër që të jetë e mundur me baterinë e makinës.
- Kontakti i 86-të i stafit duhet të jetë i lidhur me trupin e makinës.
- Në fund, vetë optika është e lidhur. Nga çdo dritë ndriçimi ka një tel minus dhe plus. Minus duhet të hidhet mbi trup, dhe pluses e të dy dritave të mjegullës janë të lidhura dhe të lidhur në kontaktin e stafit të 30-të.
Në fund, vetëm duhet të siguroheni që dritat e mjegullës të jenë të lidhura në mënyrë korrekte dhe të ndizen pasi të keni shtypur një buton në kabinën.
Ja si duket qarku i stafetës së llambës së mjegullës:
Sot është e nevojshme të respektohen disa rregulla për instalimin e dritave të mjegullës, të cilat mund të gjenden në DA. Ai përmban informacione të azhurnuara mbi instalimin dhe testimin e pajisjeve të mjegullës. Një nga opsionet më të mira është të kontaktoni një specialist i cili mund të shpejt dhe më mirë të konfiguroni optikën. Përveç kësaj, ju këshillojmë që gjithmonë t'i përmbaheni skemës së lidhjes së dritave të mjegullës, kështu që do të shmangni telashet.
Për ndriçimin optimal të rrugës, fenerët kanë një kufi specifik të rrezes së dritës në pjesën e sipërme, që do të thotë se përhapja e dritës duhet të ndodhë mbi një rrafsh horizontale. Fenerët janë montuar në fund të automjetit. Në disa raste, mund t'ju duhet të përdorni priza speciale që ofrojnë mbrojtje të besueshme për llambat e mjegullës nga stresi mekanik.
Mos harroni të monitoroni pastërtinë e dritave të mjegullave, duke kontrolluar në mënyrë periodike gjendjen e tyre. Mbi këtë, artikulli ynë se si duket diagrami i lidhjes së llambës së mjegullës ka përfunduar.
.
pyet: Andreev Boris.
Thelbi i çështjes: Unë nuk mund të gjej se ku është instaluar stafetat e llambës së mjegullës në Chevrolet Niva?
Përshëndetje të gjithëve! Dje, Shniva im e hodhi kështjellën. Unë mbërrita nga puna, vendosja makinën në parking, dilja dhe shihni se dritat e mjegullës janë ndezur. Duke u kthyer, unë nxitova te çelësi i ndërprerës dhe është i fikur. Doli, pa marrë parasysh sa e fika, dhe dritat digjen, edhe kur dimensionet janë fikur. Për të mos mbjellë gjatë natës, ai nxori një siguresë. Kam ardhur në shtëpi, kam ecur nëpër forume, kam arritur në përfundimin se problemi ka qenë në kaloni.
Sot fitova një ndërprerës të ri për ndryshimin, e zëvendësova, por nuk ka rezultat, dritat e mjegullës janë ndezur. Ata sugjeruan një arsye tjetër të mundshme - kontaktet në stafetë janë ngecur. Tani e shikoj manualin, por nuk mund ta gjej se ku është i instaluar. Djalosh që dinë ku është ndizet drita e mjegullës në Chevrolet Niva?
Diagrami i bllokut të montimit
Meqenëse nuk ka shenja në mbulesën e kutisë së siguresave në Chevrolet Niva, ju sugjerojmë të përdorni shpejtë.
Bllok diagramin e siguresave dhe stafeve.
Stafetë PTF
E kuqja tregon stafetën PTF.
Theelësi për sigurinë tuaj është një makinë e pajisur siç duhet. Nëse puna juaj përfshin udhëtime të shpeshta me makinë ose thjesht ju pëlqen të udhëtoni shumë, të udhëtoni, atëherë me siguri e dini se sa e vështirë është për një shofer pa dritat e mjegullës. Deri më tani, edhe një udhëtim në distanca të shkurtra nuk duhet të kryhet pa pajisjet e instaluara të mjegullës, pasi ndërrimet më të vogla në kushtet e motit mund të ndërhyjnë në trafikun e përditshëm. Gjithçka që është e nevojshme është një “llambë mjegulle”, mjete dhe një diagram për instalime elektrike të llambave të mjegullës.
Ku mund të marr "mjegull" me cilësi të lartë dhe të lirë?
Optika e makinave është një pjesë integrale e çdo makine. Kjo është se si të hiqni syze dielli nga një person në ditën më diell, i mbushur me pasoja të panjohura. Pra, makina duhet të ketë "syzet" e veta vetëm në rast, nuk e dini kurrë se çfarë mund të ndodhë në rrugë. Optika më e zakonshme e automobilave janë dritat e mjegullës, të cilat mund të blihen në tregun e makinave ose të porositen në një dyqan online. Sigurisht, është më mirë të blini dritat e dritave në treg, ku një specialist jo vetëm që do t'ju këshillojë për modelin që ju nevojitet, por gjithashtu t'ju tregojë se cila është skema e lidhjes për dritat e mjegullës.
Për çfarë janë krijuar dritat e mjegullës?
Gjëja më e rëndësishme në dritat e mjegullës është furnizimi i saktë i dritës. Ndriçimi i drejtpërdrejtë i rrugës varet nga kjo. Fenerët, të cilët kanë rregullim të shkëlqyeshëm, janë në gjendje të ndriçojnë një shteg prej 10 metrash, i cili është absolutisht i mjaftueshëm me një shpejtësi të ulët drejtimi në motin më të keq. Dritat e mjegullës rregullohen direkt kur është instaluar kjo pajisje. Sa mirë rregulloni këndin e incidencës së fenerave varet nga sa mirë dritat e mjegullës ndriçojnë rrugën.
Si të lidhni dritat e mjegullës?
Parimi i lidhjes së dritave të mjegullës është shumë i thjeshtë, mjafton të njihni aftësitë më të nevojshme në punën me mjetet automatike dhe në përgjithësi të keni një ide se ku dhe çfarë është. Nëse jeni një “zero” i plotë në këtë çështje, atëherë është mirë që të konsultoheni me një specialist.
Si të instaloni dritat e mjegullës?
Do t'ju duhet:
- dritat e mjegullës
- siguresa 15 amp
- bllok dhe stafetë protivotumanok
- butoni aktivizues i dritës së mjegullës
- tela dhe kasetë elektrike.
Instalimi i dritave të mjegullës shumë, megjithëse ka disa ndryshime. Megjithëse, gjykoni vetë.
- Shtë e nevojshme të hiqni panelin qendror. Aty do të shihni dy llamba të lehta për ndriçimin e rregullatorit të furrës, ato nuk na duhen, por vetë telat janë shumë të mirëpritur. Rrëshqisni dorën përmes telit deri në fund, atje do të ndjeni lidhësin me dy pin, që është ajo që ju nevojitet. Kontakti i parë në stafet do t'i bashkëngjitet.
- Ne e marrim telin e parë dhe e lidhim atë në lidhësin e dritës së furrës, dhe tjetrën direkt me butonin.
- Tjetra, teli duhet të sillet në stafetë, duke formuar kështu një qark prej 12 volt nga dimensionet e makinës dhe kontaktin e stafetë 85. Lidhja e stafetës së llambës së mjegullës është plotësisht e drejtpërdrejtë, siç mund të vërejmë. Prandaj, edhe një fillestar do të përballet me këtë.
- Hapi tjetër është shtrirja e 87 kontakteve nën pedale në bateri, dhe duhet të vendosni një siguresë, sa më afër ta vendosni atë në bateri, aq më mirë.
- Kontaktoni numrin 86 të stafetës që hedhim në trup.
- Dhe të fundit janë vetë dritat e mjegullës. Nga secila fener dritë vjen dy tela (plus dhe minus). Hidhni minusin në trup, por plusi nga një dhe drita e dytë e përparme duhet të lidhet dhe të shtrihet në bateri. Tjetra, ngrini atë në stafetë, në mënyrë që telat të mos jenë të dukshme, dhe lidheni atë në lidhësin numër 30. Tani mund të kontrolloni dritat e dritave për funksionimin e duhur. Kjo është e gjitha.
Qark reletë llambë mjegull:
Rregullat për instalimin e dritave të mjegullës.
Në ditët e sotme, ekzistojnë rregulla të caktuara se si të instalohen dritat e mjegullave.Kjo përshkruhet në Rregullat e rrugës. Ai përmban të gjitha kriteret e nevojshme, ku dhe si të instaloni pajisjet e mjegullës. Por, në mënyrë që të mos mundoni veten dhe makinën, thjesht mund të kontaktoni një specialist i cili i di të gjitha këto insekte dhe opozita. Kjo do të zvogëlojë si kohën e instalimit ashtu edhe nervat tuaja. Rregullat e rrugës përmbajnë gjithashtu një skemë lidhëse për dritat e mjegullës, e cila do të ndihmojë një shofer të papërvojë të kuptojë gjithçka.
Kërkesat për dritën e mjegullës.
Për të ndriçuar mirë rrugën e shoferit, dritat e mjegullës duhet të kenë një kufi të qartë rrezesh në majë, domethënë, drita duhet të përhapet sipër rrafshit horizontal. Shtë e nevojshme të instaloni fenerin në pjesën e poshtme të makinës, pasi që formon një shtresë të caktuar midis dritës dhe mjegullës për ndriçim të mirë. Nëse skema e lidhjes së fenerëve përfshin instalimin e pajisjeve në fund të makinës, atëherë do t'ju duhet priza. Ky është një lloj mbrojtjeje ndaj gurëve ose shkopinjve, të cilat gjatë udhëtimit mund të dëmtojnë fenerët. Spina e llambës së mjegullës do të sigurojë sigurinë e pjesës në çdo rrugë dhe në çdo kohë të vitit ose ditës.
Nëse makina juaj është e pajisur me dritat e mjegullës, atëherë duhet të vazhdoni të mbani pastërtinë e tyre. Kjo do ta bëjë pajisjet më të qëndrueshme, dhe shpërndarjen e dritës më të qartë. Kjo kërkon lustrim të parakohshëm të dritës së përparme.
Ju mund të përdorni një shërbim të ngjashëm në një makinë larëse ose të bëni vetë një veprim. Do t'ju kursejë kohë dhe para, dhe ky është një proces mjaft i thjeshtë.
Parktronic, si një lloj optike automobilistike.
Një pajisje tjetër nga optika e automobilave janë sensorët e parkimit. Kjo pajisje është krijuar për të lehtësuar procesin e parkimit në mjedise ekstreme urbane. Montimi i pajisjeve të tilla nuk është i vështirë, prandaj, çdo pronar i makinave mund ta prodhojë atë.
Nuk ka rëndësi se me cilën makinë drejtoni dhe cilat "këmbanat dhe bilbilat" janë të pranishëm në të, gjëja kryesore është që gjithçka të ishte e sigurt për ju dhe të dashurit tuaj. Gjatë instalimit të dritave të mjegullës, është mjaft i përshtatshëm.
Instalimi i dritave të mjegullës - video
Supozoni se vendosni dritat e mjegullës dhe duhet të merreni me lidhjen. Shpresoj se do të ndihmojmë në këtë, nuk ka asgjë të komplikuar në këtë situatë.
Para së gjithash, ju duhet:
- njohuri minimale në inxhinierinë elektrike (gjeni + 12V dhe masë);
- mjet - thikë, thithje, pincë, bllok terminal;
- harxhuese: shirit blu izo, tkurrje të nxehtësisë me diametër të përshtatshëm, kapëse plastike, valëzim automobilistik, pjesa më e madhe dhe terminalet lidhës.
Zgjidhni materialet themelore të përshtatshme:
- kabllo me dy tela me një seksion kryq prej 1.5 mm2 - përafërsisht. 6 m;
- në stafetë me lidhës (stafetë e zakonshme e dritës me VAZ 2108) -1 copë;
- siguresa e largët 30A -1 copë;
- butoni i rrymës (i zgjedhshëm sipas modelit, mundësisht me dritë prapa);
- lidhës në tumanki (nëse jo) -2 copë.
Tani që gjithçka është gati, ne mbledhim një skemë të tillë
fig 1.
Urdhri i asamblesë
- Hapi i parë është të krijoni dhe lidhni lidhëset në foglat, të vidhosni telin në masë (kafe në diagram) përmes terminalit në trup. Pozitivi (blu në diagram) është sjellë në zonën e baterisë (do të lidhet me stafetën, terminalin 30).
- Ne rregullojmë stafetën në një vend të përshtatshëm dhe lidhim telat. E kuqe (87) në baterinë përmes siguresës (mund të përdorni një stafetë me një siguresë të integruar). 30 A. E zezë (86) në trup përmes terminalit (e mundur për të minus baterinë). Teli i kontrollit (jeshil) nga terminali 85 është sjellë në kasolle (lejohet shpimi i mburojës së motorit). Theiftet e terminaleve 85-86 dhe 87-30 janë të këmbyeshëm.
- Ne instalojmë butonin në çdo vend të përshtatshëm, kur lidhemi, respektojmë disa rregulla.
Ne zgjedhim aftësinë për të ndezur fenerët me duart tuaja:
- autonome (duke u ndezur pa marrë parasysh çfarë, por ekziston mundësia që plotësisht të shkarkoj baterinë rastësisht, duke harruar të fikur tumanki) ne lidhemi me dimensionet ose konstanten + ACC.
- përdorni vetëm me ndezjen (nuk ka asnjë mënyrë për të përdorur dritën e prapme, për shembull nga alarmi), merrni një plus nga ndërprerësi i ndezjes ose kërkoni IGN1, ose më mirë IGN2 sipas skemës, pajisjes ose dritës së treguesit. Gjithçka, ne kontrollojmë performancën.
Disa këshilla
- Butoni i energjisë mund të përdoret nga dritat e pasme të mjegullës.
- Në lidhje, është më mirë të përdorni jo gjarpërues dhe bashkim, por lidh terminalet me tkurrjen mbrojtëse të nxehtësisë
- Shtë e dëshirueshme që të paketoni të gjitha instalime elektrike jo standarde në një valëzim, dhe më estetikisht dhe më të sigurt.