Menjëherë bëni një rezervë - të gjitha fotografitë mund të hapen për të parë në një formë të madhe nëse klikoni.
Materiale dhe mjete: Opsioni i bërë plotësisht nga shkuma në rritje nuk më përshtatet, sepse Për ta bërë këtë, keni nevojë për më shumë tekstil me fije qelqi, epoxy, nuk ishte e nevojshme të shkoni në dyqan për tekstil me fije qelqi. Unë nuk kam pasur kohë, përveç kësaj, epoxy dhe shkumë janë shumë të pista, dëshiroja të bëja atë që ishte në dorë. Vendosa të bëja gjithçka
nga 2 cm chipboard. Ne do të kemi nevojë për chipboard, ngjitës PVA, zam dru (foto 1 dhe 2) ose analog, stuko automobilave (ju mund të bëni vetëm me një skedar), materiali me të cilin ne do të jemi të ngushtë, si dhe elektrolovka, vidhos vetë-përgjimi , një lëkurë të madhe dhe një skedar.
Dimensionet: në internet, unë nuk mund t'i gjej kudo, kështu që unë mendoj se do të jetë e dobishme.
Për një fillim, unë hoqa trim, solli shtëpinë e saj dhe bëra templates nga një kuti kartoni. (Foto 3.4 dhe 5). Në idenë time, tre shtresa të chipboard duhet të ishin marrë, i.e. 6 cm të thellë + 2 cm nga dera e derës në metal (nën lëkurë) Gjithsej 8 cm, kjo është e mjaftueshme për dinamikën normale në mënyrë që të mos hyjë në magnet metalik, nëse kjo nuk është e mjaftueshme për të prerë metalin sesa duke shtuar një tjetër Lider Lids (do të ndërhyjë me këmbët). Një vrimë e rregullt nën zvogëlimin e një diametri mjaft të vogël, unë nuk qëndrova atje me 25 gdsh 13cm, nuk e thyen magnetin.
Doli 3 detaje.
Ai pinte të gjitha detajet në shabllona. (foto 6.7 dhe 8). Tjetra, me ndihmën e PVA dhe vida vetë-përgjimi, kam mbledhur dy podium, u dha atyre të thatë, të frymëzuar të gjitha parregullsitë, dhe skajet dhe kapelet dhe kapelet e vida vetë-përgjimi (për këtë, ju mund të përdorni një përzierje të PVA me tallash).
Është koha për lidhjen e podiumit me një xhep të rregullt të derës, për këtë unë pres një pjesë të xhepit në mënyrë që xhepi të ishte në masë në podium. (Figura 9) dhe bashkëngjitur me trim të dehur 3 Sams.
Në të gjitha, nuk funksionon në podium, xhepi është i prerë jo i ndezur, i.e. Midis pjesës së xhepit, e cila ngjitet me podiumin dhe shtresa e parë e podiumit mbetet një hendek i vogël prej 3 mm.
Tani e derdhja këtë bashkim me shkumë në rritje (foto 10 dhe 11). Përkufizuar me një thikë në një runiver dhe sanduiç, është vetëm mahnitëse, ju mund të jepni ndonjë formë.
Shkumë sawpakleval dhe me pika. (Foto 12, 13 dhe 14)
Finish: Fillimisht, kam dashur të pikturoj gjithçka me anti-gravitet të zi - pikturuar, doli një pamje mjaft e neveritshme. Mendova se Antiygiev do të fshehin vrazhdësinë e chipboard dhe nyjet me shtresën e tij, por në të kundërtën vetëm theksoi si bojë e zakonshme (nëse dikush dëshiron të pikturojë, atëherë ju do të duhet të hiqni dhe tronditni të gjithë podiumin për pikturë , dhe është mjaft e vështirë dhe e përditshme). Këtu gjendej gjendja ime, filloi të përpiqej të shkurtonte derminon, por ai nuk e donte atë edhe me tharëse flokësh dhe një çakmak, unë gotroached dhe shkoi për të fjetur. Mëngjesin e ardhshëm erdhi ideja për të mbuluar materialin nga pallto (nuk mbaj mend atë që quhet). Me ndihmën e zam për një pemë (foto 6) e kam menaxhuar atë. Material
Unë jam mjaft i shtrirë dhe një pjesë unë e mbulova të gjithë podiumin i përdorur ngjitës me foto 1, unë e rekomandoj këtë ngjitës, ajo mbetet elastike pas tharjes (jo dërrmuese), ajo ngrihet në 3-5 minuta.
Vënë punën time në trim dhe fillova të mendoj si
Bëni një bummer. Projektuesi është i nevojshëm për të mbyllur slot midis dhënies në derë (Figura 15) dhe aeroplani i podiumit. (përshkruar në blu në figurën 9). Pastaj bëra dy pako të organizmit, i dyti pak më i gjatë. (foto 16) dhe i ngjitur në podium. Mos e prerë materialin në podium flush, lini atë në anën e pasme.
Pastaj unë prerë vrima me një thikë në trim dhe e dehur podium në 7-vida + 1 vidë të rregullt vetë-përgjimi nga brenda + vidhos nga jashtë, kur varur në derë. Kjo është ajo që doli nga ajo:
E vetmja gjë që do të ishte e vlefshme për të bërë është të japësh drejtimin e kokat dinamike. Të kujdeset për uljen e metalit të fundit nga DSP diagonalisht, por duhet të kihet parasysh se magneti mund të prekë murin e pusit, në mënyrë që diametri i brendshëm të zgjedhë pak më të madh.
Në fotografi në podiums, 13 cm folës janë instaluar përkohësisht 25 GDSH përmes spacers (gjithashtu mbuluar me materiale). Pas lidhjes së altoparlantëve (ata u riorganizuan nga vende të rregullta) zëri ka ndryshuar mjaft për të mirë, folësit me të vërtetë luajtën, u shfaqën frekuenca mesatare (pothuajse midbass), unë vendos 10 cm folës të gjithë folësit u ndanë nga filtra shtëpi ( Sa modë flasin nëpër kalime). Në përgjithësi, unë do të them direkt, përmirësime të papritura të tilla, le të shohim se çfarë do të jetë kur unë vendos komponentin 16.5 cm akustikë. Si rezultat, kam kaluar vetëm në anti-lëng mishi, të cilin nuk isha i nevojshëm, kisha gjithçka tjetër.
Dihet se nuk ka kosto serioze të instalimit pa podiume nën midbas përpara. Dhe pothuajse në çdo model makine. Prandaj, nuk kam qëndruar para meje, për të mos bërë, por mbeti vetëm për të vendosur për dizajnin.
Disa fjalë për ndërtimin e një sistemi. Përvoja e parë e vetë-marrjes së podiumeve më trajtoi deri në kohën kur makina ishte Vaz-2109 me një panel të lartë. Përpara, kam planifikuar të aplikoj një skemë tre-komponente:
Midbas 16 cm - në podiums në hyrje;
Middertzh 13 cm - në vende të rregullta (ka pasur një plan për kickpal, por nuk ishte e mundur të zbatohej në këtë instalim);
Ushqime - në raftet e përparme.
Në orientimin e Midbasov. Në qoshet e duhura të vendosjes së folësve, ju duhet të merrni gjatë dhe të vështirë, eksperimentalisht. Por unë nuk do të bëja një mjedis të çmimit, por kam për qëllim "të prerë" skenën në të ardhmen me ndihmën e Midërendës dhe Sakers, të cilat në sistemin tre-band është mjaft i pranueshëm. Prandaj, forma dhe këndi i prirjes u zgjodhën në sy.
Zgjedhja e teknologjisë
Pavarësisht klasicizmit të famshëm të teknologjisë, një përshkrim të hollësishëm të të cilave varet në faqen avtozvuk.com në lidhje me 1996, ideja e marrjes së kornizës kompensatë bashkim të thurur për mua. Dhe thjesht aplikoni "macroflex" në trim - gjithashtu jo një opsion, kështu që unë zgjodha një skemë të ndërmjetme: "Macrooflex" është mbuluar me kornizën e energjisë prej druri dhe është i përmbytur me tekstil me fije qelqi.
Materialet kryesore
Kompensatë 8 mm, përafërsisht
0.8 metra katrorë. m, zvogëlimin e kartonit organik dhe të trashë.
Tekstil me fije qelqi të trasha prej 0.25 mm të trasha, të blera në një dyqan për lojtarët e avionëve, rreth 2 metra katrorë. m. Gjithashtu bleu një pëlhurë 0.06 dhe qymyr, por ata disi nuk kanë ardhur në handy ...
Epoxy ngjitës EDP, përdoret paketim 150 g, shumë i përshtatshëm - i gjithë shishe u edukua menjëherë. Konsumi ishte 6 - 7 pako. Prodhimi: Voronezh.
Puletë poliestër me "trup" me tekstil me fije qelqi (të ashtuquajturat "volosananka"), një kavanoz 250 g, kushton rreth 100 rubla.
Lëkura, mbajtësi i gomës për lëkurat (shitur në të gjitha tregjet e ndërtimit, është shumë i përshtatshëm!), Cutter, ngjitës PVA, shkumë plastike, makrofleks në rritje (një tullumbace e tillë), vida vetë-përgjimi, karafila të vogla.
Autoplastiline (po, në të vërtetë, jo domosdoshmërisht "auto").
Vinyl dhe zam për të, por për këtë - atëherë.
Duke bërë kornizë
Filloi me montimin: Pas dy layouts letër, u bë mjaft e qartë se vetëm një mund të jetë një formë e pranueshme e fundit. Prandaj, unë prerë pjesën e poshtme të podium, unazë nën folësi dhe strutet anësore të prerë nga kompensatë 8 mm. Nga rruga, unë vërej se të gjitha detajet që kam prerë në të njëjtën kohë në dy kopje - është shumë më e lehtë për t'i rregulluar ato, dhe këndet e drejta janë më të lehta kur blu.
Mbledhur një ndërtim të energjisë duke përdorur PVA dhe karafila 20 mm. Ajo ishte shumë e qëndrueshme në vetvete ...
Tani për xhepin e derës. Unë menjëherë e braktisën sipërmarrjen për ta bërë atë përsëri nga kompensatë - plastike e rregullt është mjaft e mirë. Prandaj, heqja e saj nga trim dhe shtrydhur në mënyrë që ajo pa probleme të shtrihet në bazën e podium. Dizajni i përfunduar ishte i mbushur me shkumë në rritje, pas përfundimit të zgavrës nën altoparlantin me plastike në celofan në mënyrë që të jetë më pak se shkuma e tepërt e shkumës. Është e nevojshme të aplikoni një shtresë të hollë, të trasha të thata, veçanërisht brenda. Suficiti u prenë me një thikë, forma e dëshiruar hoqi dorë duke përdorur një lëkurë të trashë. "Macroflex" nuk është gjithmonë që të jepet forma e dëshiruar: pas shërimit në ajër brenda rezervuarit, ajo mbetet mjaft e butë dhe e madhe. Prandaj, është më mirë të nënvizosh sipërfaqen para ngjitjes.
Defekt tekstil me fije qelqi
Përdorur me tekstil me fije qelqi të trashë - 0.25 mm. Pëlhurë është e ngopur me parafine, duhej të ishte para-formë në zjarr. Ju mund ta bëni atë në furrë, por vetëm bachelor. Unë nuk e këshilloj pjesën tjetër, është e mundur që ka një keqkuptim ... Epoxy e mëparshme Earl në shkumë, me butësi të imponuar tekstil me fije qelqi, para-ngopur me rrëshirë. Forma e boshllëqeve lejohet të vendoste një pjesë të tërë pa lypës dhe shkurtime. Suficiti i ëmbël i rrahur, nganjëherë kapi karafil në bazën kompensatë. Shtresat pothuajse nuk bluajnë. Në total, vendosni tre shtresa të indeve me një trashësi prej 0.25, dizajni ishte grooved. Ishte e panevojshme të mbijetonte me një çelës, podium dhe kështu doli si një gur - kuadri i energjisë i prekur. Megjithëse për forcë më të madhe ishte ende e mundur të jepesh një çift të shtresave të ashpra.
Në mënyrë që podiumi të shtrihet në trim nëpër të gjithë zonën e themelimit, ishte e nevojshme për të prerë një "sfond" shtesë nga Organice. Shtypur atë në kompensatë epoksi, trashësia e kërkuar e marrë nga copa të kartonit tashmë në vend.
Stuhia u imponua nga një shpatull plastik, qëndron mirë, vetëm një jetë shumë e vogël në pjesën e gatuar - disa minuta. Por shpejt ngrihet, ndërsa një podium është i copëtuar, tjetri do të thahet. Siç mund të shihet në foto, forma doli mjaft e qetë - nuk kishte asnjë për të vënë shumë. Fokusi u fokusua në kryqëzimin e xhepit dhe podiumit.
Ai e përafroi qafën e grurit të mesëm, bëri gjithçka në ballkon - fibra me tekstil me fije qelqi fluturon shumë, atëherë gjithçka është kruarje prej tij. Ai punoi në doreza prej gome, duart nuk ekzekutohen.
Përfundim dekorativ
Para-podiums së bashku me xhep të pikturuar me nitrokular të zi matte. Duket mjaft denjësisht, edhe pse sipërfaqja është e përgatitur qartë për pikturë, kështu që unë vendosa të mbuloj podiums nga vinyl. Vinyl bleu të ashtuquajturin "Mobilje", duket sikur korrespondon me konceptin e "4-rruga" (shtrihet në katër drejtime). U gjet në tregun e ndërtimit në Mitino. Është e lirë. Vinyl të tillë, unë tashmë e shtrëngova një podium (jo këtë!), Forma e vërtetë, më embossed - rezultatet janë më shumë se të pranueshme.
Kur përdoret fort zam "88" dhe një tharëse flokësh ndërtimi. Ngjitja flashed të dyja sipërfaqet, qarqet koncentrike nga vendi i uljes nën altoparlantin, vinyl u ngroh me ashpërsi me një tharëse flokësh dhe u vendos pa shumë përpjekje. Nuk është e nevojshme të themi gjithçka menjëherë, është më mirë të presësh për gjysmë ore. Pas zvogëlimit, pas zvogëlimit, ju mund të mbështetni superclaim.
Instalim
Në trim, vrima prerë vrimë, e dehur atë në bazën kompensatë me vetë-tërheq. Në derë vetë unë kam për të zgjeruar një vrimë të rregullt nën folës. Për të krijuar një dizajn monolit "podium - derë" nga kompensatë, 10 mm prerë rreshtim, smared sealant dhe i dehur fort 7-vida në derë. Kur të aplikoj trim me kaçavidën në derë, është e shtrënguar fort për rreshtim. Tjetra, e gjithë kjo është e shtrënguar nga vetë-rezervat rreth perimetrit të hapjes së brendshme në bazë të formimit të një strukture monolite. Si rezultat, qëllimi u arrit: podium përmes rreshtit të aplikuar fort në derën e derës. Është më mirë të ngresh derën në derë në këtë makinë, edhe pse kisha një pistoni të mirë për mua mirë.
Vendosni folësit
Folësit u shfaqën kur podiumet ishin bërë tashmë (gabimi që unë nuk e përsëris në të ardhmen). Doli se gjenerata HiFonics Hifonics Midbas 6.2C nuk janë të vendosur në podiums - dhe shporta është më e gjerë, dhe magnet është shumë më i pritur. Prandaj, vendet e uljes që duhej të merrej, dhe në një formë mjaft të përafërt ...
Rreshtimi plastik nën folësi i ngjitur me një sealant silikoni në sipërfaqen e podiumit, duke eliminuar të gjithë lirimin e përshtatjes.
Midbas tregoi tingull të madh - bas thellë dhe të ngushtë. Podiumet konstruktive, mali i tyre është gjithashtu shumë i provuar. Megjithëse praktika e bërjes së podiumeve në prani të mungesës së folësve nuk mund të njihet siç duhet - në rastin tim, për shkak të madhësisë së vogël të hapjes së brendshme të podiumit, u vërejt "efekti i tunelit". Kjo do të thotë se në vëllim të lartë masa e ajrit, duke lëvizur nga një diffuser, nuk ka kohë për të lëvizur lehtë midis magnetit kreu dhe internals të podiumit. Kështu, membrana formon një shkarkesë dhe altoparlanti fillon të "trokas spirale", edhe pse furnizimi i energjisë elektrike ende nuk është arritur. Për të shmangur këtë, ju duhet të bëni vrima të brendshme sa më gjerë që të jetë e mundur.
Podiumet për folësit janë pajisje që ju lejojnë të arrini një shpërndarje të patëmetë të shëndoshë përmes kabinës së makinës. Këto janë vende të ashtuquajtura ulëse që përshtaten me kolonat. Me x, ju mund të zvogëloni nivelin e dridhjeve, si dhe të përmirësoni cilësinë e tingullit të muzikës. Konsumatorët që kanë nevojë për të blerë podiume për altoparlantë në sallon të makinave mund të kontaktojnë ekspertët tanë për ofertën e favorshme. Kompania jonë shet produkte të brendshme dhe të jashtme dhe universale për çdo organ të makinave.
Emërimi i produkteve
Podiums janë një element i domosdoshëm i kabinës së makinave në të cilat nuk ka vend të veçantë për montimin e folësve të sistemit të zërit. Detyra kryesore e produkteve të ngjashme është sigurimi i cilësisë dhe zërit të pastër të melodive. Prandaj, podiums për akustikë në makinë u bënë një pajisje të tillë popullore.
Instalimi i tyre bën të mundur që të dërgoni tingullin përgjatë trajektores së dëshiruar. Për të siguruar cilësinë maksimale, ato duhet të vendosen sa më të larta në kabinën e makinave. Kjo është arsyeja pse podiumet për akustikë bëjnë të mundur arritjen e efektit stereo, në të cilin të dy shoferët dhe udhëtarët do të jenë në gjendje të gëzojnë muzikë me cilësi të lartë, pavarësisht nga vendndodhja e tyre. Për të blerë pajisje të tilla, mësoni gamën e katalogut tonë. Në të, ju do të gjeni një podium universal nën dinamikën, pajisjet për dyert e pasme ose të përparme etj.
Avantazhet e përdorimit
Një gabim tipik i shumë shoferëve duhet të përdoret gjatë instalimit të akustikës së elementeve bazë të pastrimit. Kjo është për shkak të faktit se rasti plastik nuk mund të japë sistem të shëndoshë mbrojtje të mirë kundër vibrimeve. Më shumë efikasitet në këtë rast, podiumet dallohen nën dy dinamikë. Përfitimet kryesore përfshijnë këtë pajisje:
- Shpërndarja uniforme e zërit. Duke blerë një podium për folësit, entuziastët e makinave do të jenë në gjendje të arrijnë dëgjimin e muzikës së mirë në pjesën e përparme dhe në vendet e pasme. Për ta bërë këtë, është e mjaftueshme për të zgjedhur vendin optimal të instalimit të pajisjeve nën makinën e sallonit.
- Reduktuar dridhje. Me blerjen e podiumeve për akustikë, konsumatorët menjëherë do të zvogëlojnë nivelin e ndikimit të lëkundjeve në sistemin e zërit. Si rezultat, zhurma ndikon në cilësinë e riprodhuar muzikës.
- Universalitet. Vendet e rregullta për sistemet e zërit ju lejojnë të montoni akustikën e madhësive specifike, megjithatë, instalimi i podiumit për folësit e pasmë ose dyert bën të mundur instalimin e një sistemi të çdo dimensione. Kjo është për shkak të faktit se pajisja fsheh të gjitha telat dhe elementet funksionale të pajisjeve.
- Komoditet. Pavarësisht nga vendi i bashkëngjitjes, podiumet e altoparlantëve për dyer ose pjesë të tjera të shitësit të makinave rregullojnë në mënyrë të vendosur sistemin e zërit. Fiksimi i besueshëm paralajmëron prodhimin e parakohshëm të pajisjeve në rregull.
Ne kemi klientët do të jenë në gjendje të blejnë produkte që përmirësojnë cilësinë e zërit, nën organe të ndryshme. Universals, sedans, hatchbacks, coupe, minivans - për çdo sallon ju mund të blini një podium për altoparlantët e pasmë, derën ose ndonjë tjetër. Çmimi i produktit tregohet në dosjen.
Mundësitë e klientëve
Produktet që ofron kompania jonë përbëhet nga lëkure, gjë që e bën atë një produkt të qëndrueshëm dhe të besueshëm. Duke blerë një podium universal për folësit ose ndonjë tjetër, klienti do të jetë në gjendje të vlerësojë avantazhet konstruktive të produkteve. Bazuar në "petalet", me ndihmën e së cilës është kryer instalimi i besueshëm i dizajnit në kabinën.
Një sistem i ngjashëm i fiksimit është cilësisht i ndryshëm nga ai që ofron në kompanitë që shesin makina. Sepse ata rregullojnë podiumet nën dinamikën për dyer ose vende të tjera të sallonit në vidhos vetë-përgjimi. Si rezultat i lëvizjes së makinës, sistemi është i liruar, duke reduktuar cilësinë e zërit.
Seritë e asortimentit të kompanisë sonë përfshin dhjetra modele podium për folësit, çmimi i të cilave është paraqitur në katalogët. Konsumatorët do të jenë në gjendje të zgjedhin produktet për Vaz, Ford, Lada, Mercedes, "Niva", "Chevrolet" dhe shumë makina të tjera.
Nëse jeni duke synuar për të blerë podiums nën dinamikën që do të përputhen në mënyrë optimale makinën tuaj, konsulentët e kompanisë sonë do të ofrojnë informacionin e nevojshëm. Ata do të informojnë klientët lidhur me rendin e mallrave, kohën e dorëzimit dhe koston.
Podiumet akustike lejojnë përmirësimin e zërit në mënyrë efikase. Për shkak se ju lejon të instaloni pothuajse çdo akustikë, duke tërhequr një zë në një nivel të ri, pa u kufizuar në kufirin e madhësive standarde të 13 cm. Avantazhi i podiumit është fakti se nëse instaloni akustikë në derë, pasagjeri nuk do të shkojë budalla, ndërsa ju nuk mund të dëgjoni asgjë. Siç e dini, tingujt e frekuencës së lartë dhe të mesme kanë një drejtim të theksuar (aq më i lartë frekuenca, zëri bëhet më i orientuar). Thjesht duke folur, rezultatet e shenjave do të duken më të sakta në zonën ku ato janë të drejtuara. Për këtë arsye, është e rëndësishme që folësit e SC-, PVF të instalohen sa më të larta në kabinën e makinës dhe u drejtohen dëgjuesve, dhe nëse më saktësisht, diamoni i duhur - shoferi, e majta - "në kokë "Nga pasagjeri.
Blej podiums dhe instaloni më lehtë me lehtësi, sepse nuk është e nevojshme për të prerë hekurin në derë. Kur podiumi është fiksuar në prerje të derës, dhe folësi është në podium, është e mundur të vlerësohet efekti. Nuk do të ngadalësohet për të ndikuar: zëri "i korrur" nga folësit do të zhduket fantazmat, do të shtohen ora të ulëta, transparenca e zërit do të përmirësohet. Folësit në volum të lartë nuk janë më vibrating.
Një karan i gjerë e bën podiumin shumë të dobishëm. Përdorimi i lëkurës ndihmon atë lehtë të hiqni pluhurin dhe pluhurin. Një tjetër avantazh i podiumeve janë petals në bazë të të cilave mund të jetë "përgjithmonë" për të arritur drejt derës. Ndërsa shumë firma mbërthejnë akustikë me vetë-vizatim të gjatë përmes podiumit në hekur dhe në thelb akustikë që varen në vetë-vizatim. Përveç të gjitha, podiumi përshtatet në mënyrë të përkryer në brendësi të sallonit, duke e bërë atë më të bukur dhe më të pasur.
Podium për akustikë Vaz 2108
Podium për akustikë Vaz 2108 mund të bëhet në vetvete, duke përdorur vetëm njohuri fillestare dhe duke bërë një përpjekje të vogël. Nga ky botim, ju do të mësoni se si të bëni podiume akustike në Vaz, pa shpenzuar shumë kohë.
Qëlloj
Podiumet janë të detyrueshme në audio të makinave. Ata japin një mundësi unike për të përmirësuar treguesit e cilësisë dhe të shëndosha.
Përveç kësaj, në sajë të podiumeve, ju mund të instaloni folësit e automobilave (shih) absolutisht çdo madhësi, pa u kufizuar në folësit e 13 centimetër, tingujt e të cilave a priori nuk mund të jetë më i mirë.
Një tjetër avantazh i dukshëm i podium quhet fakti që pasagjerët ulur në pjesën e prapme nuk do të duhet të pengojnë nga një tingull i fortë, ndërsa vetë shoferi pothuajse dëgjon asgjë. Kjo situatë është vërejtur shpesh në makina, ku nuk ka skenë akustike me kompetencë, njëra prej të cilave është podiumi.
Shënim. Siç e dini, folësit tingëllojnë më mirë në zonën ku ato janë të drejtuara. Për këtë qëllim, ata po përpiqen të instalojnë sa më shumë që të jetë e mundur për të arritur drejtimin e duhur. Më saktësisht, kolona e duhur duhet t'i drejtohet shoferit, të majtë - në pasagjer.
Fix podium është mjaft e lehtë, sepse shkurtimet e hekurit në derë nuk është aspak e nevojshme. Nëse podiumi është tashmë i fiksuar në trim, dhe folësi është futur në të, atëherë efekti do të japë menjëherë veten të ndjerë.
Zhurma bëhet si "fener" ose më saktë për të thënë të lirë nga folësit. Ghosts të ndryshme ndërhyjnë me zhytje në botën reale të muzikës zhduken.
Është veçanërisht e mirë që frekuencat e ulëta shtohen pas një modernizimi të tillë, dhe transparenca e zërit në një sfond të përgjithshëm është përmirësuar ndjeshëm. Folësit nuk do të lëkunden, si më parë, në volum të lartë, nëse është bërë me kompetencë dhe fikse.
Sot në tregje ka një gamë të gjerë podiumesh. Në thelb, ato janë të mbuluara me lëkurë ose qilim, kanë petals në bazë të kësaj ndihme i rregullojnë fort ato në derë.
Podiumet elegant, të bukur, moderne përshtaten në mënyrë të përkryer në brendësi të kabinës së çdo makine.
Podium shtëpi për tetë
Natyrat e blerjes krijuese të podiumit të gatshëm nuk do të japin kënaqësi. Preferencat individuale në këtë rast nuk mund të merren parasysh.
Për këtë arsye, vetë shoferët vetë zgjidhen duke e bërë podiumin, veçanërisht, nuk ka asgjë të vështirë në këtë çështje. Më poshtë do të paraqesim udhëzimin se si ta bëjmë atë kompetent dhe të konsolidojmë podiumin me makinë Vaz 2108.
Do të jetë e dobishme për të rikujtuar lexuesin se nuk ka instalim modern të rëndë akustik në një makinë pa podiume nën Misbazën e përparme nuk kushton. Më shpesh ne po flasim për një skemë me 3 përbërës, ku Midbas është i lidhur në derë në derë, në një mbulesë të lartë 13-centimetër, dhe ato janë të spërkatur në raftet e përparme.
Shënim. Në parim, Midbas duhet të zgjidhet nga këndi i duhur, i gjatë dhe i vështirë, duke eksperimentuar, por është e mundur, sepse "çmimi" skena për pjesëmarrje në garat audio të makinave nuk do të bëjë. Është mjaft e lejueshme, për të thënë, "prerë" skenën me ndihmën e akustikës tre-komponent: Midbas, Midrena dhe cookies. Forma dhe pjerrësia e dinamikës zgjidhet në sy.
Sa për përpunimin e kornizës kompensatë, u vendos që të llak atë me një makroflex, dhe pastaj tekstil me fije qelqi të pagës.
Çfarë do të nevojitet:
- Kompensatë, preferohet 8 mm trashësi. Rreth rreth 1 katror. metër është e mjaftueshme;
- Tekstil me fije qelqi, trashësia e të cilave duhet të jetë rreth 0.25 mm. Rreth 2 metra katrorë. Metër tekstil me fije qelqi mund të blihet në dyqan për modelin e avionëve;
- EDP \u200b\u200bose në epoksi të thjeshtë. Zam, e cila merr 150 gram në shumën prej 7 copë (të mjaftueshme dhe ende mbeten);
- Domosdoshmërisht duke vënë në një pemë;
- Makroflex (1 cilindër);
- Vida vetë-përgjimi dhe thonjtë e vegjël;
- Zam pva;
- Prestar i veçantë.
Algoritmi për kryerjen e një operacioni
Para së gjithash do të jetë e nevojshme për të bërë të arsyeshme. Eksperimentoni gjatë kohës që keni nevojë për letër ose karton. Si rregull, një formë e pranueshme për pjesën e poshtme të podiumit mund të jetë vetëm një opsion.
Fillimi i Macroflex:
- Pritini pjesën e poshtme të podiumit nga kompensatë, gjithashtu një spacers ovale dhe anësore.
- Ne mbledhim të gjitha detajet me ndihmën e vida vetë-përgjimi, karafilat dhe zam PVA. Kjo është ajo që duhet të ndodhë - në foton më poshtë;
- Siç mund ta shihni, diametri i brendshëm i unazës është bërë me një diferencë, dhe madhësia e jashtme duhet të flushed me 16 mm kokë;
- Sa për shkurtimin e pjesës së spikatur të xhepit të fabrikës, është qartë e dukshme në foton tjetër;
- Dyert e xhepit për të bërë përsëri nga kompensatë nuk është domosdoshmërisht, sepse plastika e rregullt, në parim, është mjaft e mirë. Në mënyrë që të mos humbasësh shumë kohë, ne e heqim atë nga mbështjellja dhe kapem në produktin tonë, vetëm të nënshkruajë paraprakisht në mënyrë që të shtrihet në sipërfaqen e kompensatës;
- Tani ne mbyllim vrimat me një unazë plasticine, të mbështjellë në celofan (në mënyrë që të ishte më e lehtë për ta hequr atë nga makroflex) dhe derdh një makroflex në dy të drejta;
Shënim. Makroflex duhet të aplikohet në një shtresë të hollë, pasi që drita të gjata të gjata dhe nuk është aspak e përshtatshme.
- Prerë pas tharjes mbi një thikë;
- Ne marrim lëkurën dhe përpunojmë sipërfaqen duke i dhënë një formë të qetë (është e dëshirueshme të përdorim zinxhirin e trashë);
- Nëse mbytet dhe vrimat e mëdha janë të dukshme pas lëmimit, mund të mbushet me epoksi të përzier me tallash;
- Sipërfaqja e sipërfaqes, nëse keni nevojë të jepni formën e dëshiruar.
Faza e punës me tekstil me fije qelqi:
Shënim. Si rregull, makroflex është mjaft i butë, veçanërisht brenda. Stuko jep një ngurtësi shtesë.
- Tekstil me fije qelqi përdorin të trasha (0.25 mm) dhe e ngopur atë me parafine, para se të rrjedhin në zjarr;
- Në avantazh EDP rubbed shkumë;
- Ne aplikojmë tekstil me fije qelqi të ngopur me rrëshirë.
Shënim. Forma e produktit tonë do të lejojë të vë një pjesë të fortë të materialit pa lypur dhe shkurtime.
- Tekstil me fije qelqi të tepërt, të cilat varen, fshij dhe gozhdë me karafil të vegjël në kompensatë.
Këshilli. Ju nuk mund të aplikoni një stuko këtu.
- Ne aplikojmë tre shtresa të tekstil me fije qelqi në mënyrë që dizajni të jetë superior.
Shënim. Celenent do të neglizhohet. Podium dhe ajo duhet të jetë tashmë si gur. Por, megjithatë, nëse dëshironi, mund të bëhet në disa shtresa.
- Pritini një "mbrapa" shtesë nga ororiteti dhe rregulloni atë në kompensatë me ndihmën e EDP. Kjo është bërë në mënyrë që podiumi të shtrihet në trim në të gjitha fushat;
- Align të gjitha me një stuko, duke bërë disa shtresa me ndërprerje që nevojiten për tharjen e shtresës së mëparshme dhe trajtimin e syrit.
Këshilli. Është e dëshirueshme për të vënë stuko me një shpatull plastike. Ky mjet është më i lehtë për të punuar: stuko bie në pikërisht një shtresë të hollë.
Gëzim mundësisht letër me grurë të mesme. Por nuk është e nevojshme të punosh në dhomë, pasi tekstil me fije qelqi do të "lëshojë" një sasi të madhe pluhuri të dëmshëm, nga i cili gjithçka kruajtje. Jashtëzakonisht e rekomanduar për të veshur dorashka gome.
- Mbetet për të pikturuar podiumin në të zezë, duke përdorur një nitrocracy matte. Është e dukshme e pikturuar në një shtresë, edhe pse është e mundur në dy, nëse qëndron keq;
- Më tej në vullnet, ju mund të mbuloni produktin me vinyl ose materiale të tjera.
Hauling vinyl ose fazë përfundimtare:
Shënim. Vinyl është ideale për të tendosur podiums. Është lehtësisht e shtrirë në drejtime të ndryshme, çmimi nuk është e ashpër, por rezultatet janë më shumë se të pranueshme.
- Kalojnë sipërfaqen e podiumit;
- Zam flaming për vinyl, mundësisht dy herë;
- Ne aplikojmë vinyl dhe pak prej saj me tharëse flokësh të ngrohtë;
- Zbut me kujdes materialin;
- Të lënë të thatë në dhomën e ngrohtë për një ditë apo edhe dy.
Puna është e përfunduar. Në procesin e mbajtjes me duart tuaja, është e këshillueshme që të shihni rishikimin e videos tematike, të shqyrtoni fotot e dobishme - materialet dhe skemat.
Nëse nuk i përshtatet vinyl, si një material për një tërheqje ose podium, unë do të doja tjetër, pastaj në faqen tonë ju mund të gjeni udhëzime të ngjashme interesante për prodhimin.
Pesha: 3.5 kg.
Sipas parazgjedhjes, ngjyra e podiumit përkon me ngjyrën e sallonit standard të larguar!
Podiumet janë të dizajnuara për të përmirësuar cilësinë e tingullit të një sistemi akustik dhe për të zvogëluar dridhjet në derë. Podiumet akustike janë një element i shkëlqyer i brendshëm.
Të gjitha produktet janë të pajisura me një vendosje të domosdoshme dhe udhëzime të detajuara të instalimit.
Ne prodhojmë urdhra standarde dhe individuale, ne ofrojmë politikë efektive të çmimeve, ne ofrojmë vlerën më të mirë për çmimin dhe cilësinë e mallrave.
Prodhuesi rezervon të drejtën për të ndryshuar karakteristikat e produktit, pamjen dhe plotësinë pa njoftim paraprak për shitësin.
Podiums Vaz 2109, 21099 (2 komponent) Shqyrtime
Vlerësimi mesatar i blerësit: () 3.00 nga 5 yje të mundshëm
0 | ||
0 | ||
1 | ||
0 | ||
0 |
podiume
1-podiums nuk janë të ngushtë ngjitur, baza është e përgatitur keq.
2-unaza për dinamikën e MDF dhe jo kompensatë.
3-Pse nuk shkruani se nuk keni gjatësi të mjaftueshme të telave! Dritaret e energjisë, dhe duhet të zgjasin.
Vizatoni vëmendjen tuajKjo shpërndarje kryhet në kurriz të klientit dhe nuk është përfshirë në koston fillestare të rendit. Ju lutemi prisni për konfirmimin e porosisë nga menaxheri i kompanisë për të marrë shumën përmbledhëse të rendit.
Afati i fundit për formimin dhe dërgimin e një urdhri është 3-10 ditë pune Pas marrjes së pagesës për llogaritë tona dhe varet nga një numër faktorësh:
- Urdhërat që nuk përfshijnë shërbimin e pikturës, duke iu nënshtruar disponueshmërisë së mallrave, të përfunduara brenda 3-5 ditëve të punës (koha e përafërt).
- urdhra, duke përfshirë shërbimin e pikturës, në varësi të disponueshmërisë, të përfunduar gjatë 7-12 ditëve të punës (kohë të përafërt).
- Urdhërat individuale Plotësoni për 7-14 ditë pune (afate të përafërt).
Pickup nga artikujt e çështjes në togliatti
Në mënyrë që të vendosni një urdhër për mallrat që jeni të interesuar, zgjidhni metodën e shpërndarjes "Pickup nga dyqani". Pastaj plotësoni të dhënat e kontaktit dhe prisni për konfirmimin e rendit.
Adresa e pikës së lëshimit:
RF, Rajoni i Samara, Togliatti, GSK "flakë", ul. Ofisan 14.
Orari i pikës së lëshimit:
mon-Fri 7:00 - 19:00, në MSK
Formimi i urdhrit për vetë-nivel është bërë me një parapagim të pjesshëm ose të plotë të rendit. Marrja e një urdhri pjesërisht ose të paguar është bërë në artikullin e lëshimit gjatë orarit të punës.
Dorëzimi në rajonet e postës ruse
Dorëzimi kryhet me postë të Rusisë në ndarjen e përcaktuar në rend (në përputhje me adresën dhe indeksin tuaj), me parapagim 100%. Kostoja dhe kohët e dorëzimit të përafërt llogariten individualisht kur të konfirmohet urdhri. Në mënyrë tipike, kostoja e transportit është nga 300 rubla për një paketë të vogël në 2000 rubla për parakolp ose pragjet, dërgimi në rajonet e largëta është e shtrenjtë.
Pas dërgimit të rendit, do të dërgoheni në email me alarmin me numrin e pistave, sipas të cilave mund të gjurmoni lëvizjen e ngarkesës në zyrën postare ruse.
Dorëzimi me para në dorë të dorëzimit nuk është kryer, për shkak të rritjes së incidencës së kthimeve. Shpresoj për të kuptuarit tuaj!
Dërgimi i parcelave janë të mundshme peshë deri në 15 kg Dhe me dimensione Gjerësia + lartësi + thellësi - me pak fjalë jo më shumë se 3 metra.
Shënim! Jeta e parcelave në zyrën postare ruse është reduktuar në 15 ditë! Në këtë rast, ri-njoftimi në adresën e specifikuar në dërgimin nuk është dërguar.
Dorëzimi në rajonet me kompanitë e transportit (TC)
Ne anije urdhra nga kompani transporti në më shumë se 100 qytete të Rusisë, ne punojmë me shumicën e kompanive ruse të transportit. Dorëzimi në largimin e terminalit në Toleyatti është i lirë, i gjithë pjesa e mbetur e kostos së shpërndarjes paguhet pas marrjes në terminalin TC në qytetin tuaj. Kur përpunoni rendin, ne mund të zgjedhim bartësin më të shpejtë dhe të lirë në zonën tuaj. Pas dërgimit të rendit, do të dërgoheni në email me alarmin me numrin e pistave, për të cilat mund të gjurmoni lëvizjen e ngarkesës në faqen e internetit të kompanisë së transportit.
Përfitimet e dorëzimit duke përdorur TC mund të atribuohen rrethprekni kufizimet në volumin dhe peshën e mallrave.
Vëmendje! Dërgimi i pjesëve nga plastike, abs, qelqtë, etj. Rekomanduar nga kompanitë e transportit vetëm në paketim të ngurtë (pirg)!
Kujdes: koha e dorëzimit përcaktohet nga kompania e transportit dhe janë zona e tyre përgjegjëse. Vs-avto nuk mund të ndikojë në kohën e dorëzimit kur ngarkesa tashmë është dërguar.
Në lidhje me ndryshimet e 6 korrikut 2016 në ligjin federal nr. 374-FZ "për luftimin e terrorizmit", si dhe miratimin e "Paketa Pranvera" kundër terrorizmit, nga 20 korrik 2016, dërguesi duhet të dorëzojë informacion për veten, marrësin dhe paguesin. Në veçanti, nga klientët tanë nevojiten të dhënat e dokumentit të identitetit (pasaporta e federatës ruse, patentë shoferi).
Ju lutemi të trajtoni me mirëkuptimin për faktin se kur vendosni një urdhër kur zgjedhni "metodën e shpërndarjes: kompanitë e transportit", ju duhet të plotësoni fushën "Detajet e pasaportës".
Transporti dhe Forcimi i Kompanisë TK Kit (TC GTD)
Kompania e transportit (GTD) kryen ofrimin urgjent të mallrave nga 1 kg në Rusi me rrugë. Kompania është e specializuar në shpërndarjen e punëve ekipore midis qyteteve kryesore të rajonit të Uralit dhe nga qytetet e tjera të Rusisë për Uralet dhe në rrethin federal siberian.
Freight Forwarding Company PEC
"Kompania e parë e ekspeditës" është e angazhuar në transportin e ngarkesave të ngarkesave në Rusi nga 1 kg deri në 20 ton. Sot, Pec është një nga bartësit më të mëdhenj të mallrave në vend, shërbimet e të cilit kanë përfituar tashmë më shumë se 350 mijë klientë.
Kompania e transportit dhe përcjelljes "Zadedorexpedition"
Shërbimi i shpërndarjes është kompania më e madhe e transportit dhe forwarding në Rusi, e cila kryen transportin hekurudhor dhe rrugor, si dhe ekspedita e ngarkesave të kombinuara në Federatën Ruse.
Kompania e përcjelljes së mallrave "Baikal-Service"
Shërbimi Baikal është një nga kompanitë më të mëdha të transportit dhe forwarding në Rusi duke transportuar mallra në territorin e Federatës Ruse.
Kompania e transportit "Energji"
Kompania e transportit Energjia në mënyrë profesionale kryen transportin e ngarkesave të ekipit nga qytetet e Rusisë, CIS dhe Kinë. Edukuar në maj 2004 në Novosibirsk, TC Energjia sot ka degë në 110 qytete të Rusisë nga Krasnodar në gjetjen, më shumë se 20 në CIS dhe Kinë. Flota vet e përbërë nga më shumë se 300 makina që kryejnë fluturime ditore.
Shërbimi i dorëzimit të ndërlidhjes "SDEK"
Dokumentet e Operatorit të Dorëzimit të Shpenzimeve Ruse dhe Transportit. Kompania u themelua në vitin 2000.
Më shumë se 900 divizione dhe zyrat përfaqësuese të kompanisë në qytetet e Rusisë na lejojnë të kontrollojmë kalimin e mallrave në të gjitha fazat, duke zvogëluar ndjeshëm kohën, zgjedhin rrugë të besueshme dhe të provuara në mënyrë të përsëritur në të gjitha vendbanimet e vendit.
Për ruajtje më të madhe të largimit tuaj, kompania SDEK ofron shërbime për pirgin e ngarkesës. Kostoja e arkës për çdo dërgesë llogaritet individualisht.
Është e mundur të dërgoni nga kompanitë e tjera të transportit në koordinim me menaxherët tanë.
Të nderuar klientë!Kompania jonë kujdeset për klientët e saj dhe është e rëndësishme për ne se gjatë kryerjes së dorëzimit ju keni marrë ngarkesën tuaj pa vonesë, probleme dhe në konfigurim të plotë.
Për ta bërë këtë, ju lutemi t'i përmbaheni disa rregullave të thjeshta që do të ndihmojnë për të zgjidhur shpejt çështjet e diskutueshme:
Kur merrni ngarkesën, kontrolloni me kujdes:
- Paketimi dhe Integriteti i Scotch;
- Pajtueshmëria e numrit aktual të numrit të vendeve të specifikuara në TTN;
- Pajtueshmëria e të dhënave për marrësin e specifikuar në kutinë me të dhënat tuaja;
- Pesha e kutisë (peshoni ngarkesën! Kjo do t'ju ndihmojë të përcaktoni se në cilën fazë u ngrit një mungesë).
Vetëm sigurohuni që informacioni në lidhje me ngarkesën tuaj të korrespondon me të dhënat e specifikuara në faturën e mallrave, nënshkruani dokumentet.
Në rast se paketimi është thyer, pesha e ngarkesës është më pak e deklaruar në TTN, ju nuk e transmetoni ngarkesën tuaj, kutia është e lagur ose e humbur, ndiqni udhëzimet e mëposhtme:
- Përcaktoni artikullin në afishe në kutinë, e cila mungon, është dëmtuar ose nuk ju takon.
- Bëni hyrjen e duhur në dokumentet shoqëruese dhe bëni një aplikacion.
- Kontaktoni një deklaratë për përfaqësuesin e kompanisë së transportit dhe të bëjë një akt.