Për shumë njerëz, makina e tyre nuk është vetëm një mjet lëvizjeje, por edhe nga rruga e vetë-shprehjes. Blackheads po bëhen gjithnjë e më popullore, pasi është mënyra më e gëzuar dhe më e lehtë për të personalizuar pamjen e makinës. Dimming fenerët e pasme mund të bëhet në një seminar profesional, si dhe të drejtën në garazhin e saj. Të gjitha që ju duhet është disa këshilla dhe materiale të thjeshta që mund të blihen lehtësisht në çdo dyqan ekonomik.
Hapa
Përdorni bojë në kanaçe
- Tani merrni letër zmerile në madhësi në 1000 dhe përsëritni të gjithë procesin përsëri, pas të cilit fshij kokën e vdekur dhe le të thatë.
- Dhe së fundi, merrni letër zmerile në madhësi në vitin 2000 dhe bëni fenerët e fundit duke përdorur lëvizje të qetë dhe të sigurt. Pastroni fenerët dhe le të thahen. Tani dritat në kontakt duhet të jenë absolutisht të qetë dhe të kenë një ngjyrë paksa me baltë.
- Fshini dritat me disa substanca pastrimi, të tilla si benzina, një mjet për larjen e dritareve ose alkoolit, dhe le të thahen.
- Larja e zezës në ujë është një metodë e mirë, pasi zmeriri bëhet më fleksibël dhe është më fleksibël për të punuar me të.
-
Shoot kasetë me yndyrë në sipërfaqe që ju nuk dëshironi të pikturoj. Në disa raste do të jetë një llambë e kundërt, pasi në disa shtete nuk duhet të errësohet sipas ligjit. Edhe përkundër ligjeve, thelbi i llambës së kundërt mund të komplikojë menaxhimin e automjetit gjatë natës, prandaj, ngjitni kasetë dhe në të, nëse doni të largoheni nuk është pikturuar. Duke përdorur një mjet të mprehtë, prerë me kujdes skajet.
Llak bojë. Sa më shpejt që të thara dritat, dhe ju u ruajtur (të nevojshme) sipërfaqet, vendosni fenerët në sipërfaqen e qëndrueshme të punës për t'u ngjyrosur. Shoot tullumbace me bojë mirë dhe mbani atë në një distancë prej 7 inç për shtresën më të mirë sipërfaqësore. Aplikoni bojë me një shtresë të lehtë dhe uniforme, duke u siguruar që fenerët kanë tonin të njëjtë. Jepni shtresën e parë të bojës të thatë, rreth 20 - 30 minuta.
- Sapo shtresa e parë e bojës Dries, ju mund të aplikoni të dytin. Pas përfundimit të punës, jepni Pharamin të qëndrojë 20-30 minuta derisa ata të jenë të thatë në kontakt. Pastaj ju mund të aplikoni shtresën e tretë të bojës dhe t'i jepni mundësinë të thatë plotësisht. Si rregull, ju do të duhet të aplikoni tre shtresa të bojës për të marrë nivelin e dëshiruar të errësirës.
- Kur të arrini nivelin e dëshiruar të ngjyrës, vendosni fenerët në diell për ngurtësim prej rreth 45 minutash ose një ore. Ky hap nuk është i nevojshëm, por do të shohë se si do të duken dritat tuaja në rezultatin përfundimtar.
- si të shkoni në procedurën e ardhshme mos harroni të hiqni të gjitha skocezët.
-
Veshje e dritës. Hapja e fenerëve llak është shumë e ngjashme me procesin e pikturës. Sapo shtresa e fundit e tharjes së bojës dhe ngurtësoi diellin, vendosni dritat mbi sipërfaqen e punës dhe llak një shtresë të hollë llak në sipërfaqen e tyre. Ju mund të përdorni një llak me shtresë të shkëlqyeshme nëse dëshironi. Sa më shpejt që të përfundoni spërkatje, le të jetë shtresa e llak, rreth 20 minuta para se të aplikoni shtresën tjetër.
Sand back dritat përsëri. Sapo fenerët janë të thata plotësisht (mund të zgjasë disa orë), përsërite përsëri procesin e okurizimit. Mos harroni të thith zmerin në ujë dhe të përdorni lëvizje më të tenderit në një drejtim.
- Përdorni 800 madhësitë e para të letër zmerile, pastaj 1000, dhe pastaj përpunoni madhësive 2000.
- Kur mbaroni. Headlamps e pasme do të ketë një ngjyrë të turbullt.
-
Aplikoni material gërryes. Kur fenerët janë plotësisht sanduiç, aplikoni një sasi të madhe të materialit gërryes në një pecetë ose një leckë të pastër. Aplikoni materialin gërryes në mënyrë të barabartë duke përdorur lëvizjet e fërkimit. Pastaj duke përdorur mocionet e forta rrethore dhe lëvizjen e fuqishme të dorës rrinë materiale gërryese në fenerët e pasmë që mbushin të gjitha gërvishtjet pas lëmimit.
Ne aplikojmë polyrolol dhe dylli. Pasi të keni përfunduar aplikimin e një materiali të rëndë, fshini dritat e pasme me një leckë mikrofibrous, dhe pastaj duke përdorur të njëjtën teknikë aplikimi, aplikoni Polyrolol. Edhe një herë, fshij fenerët para se të aplikoni dylli në diskrecionin tuaj.
Instaloni fenerët e pasmë. Sa më shpejt që të ndjeni fenerët tuaj, ata mund të instalohen përsëri në makina. Mos harroni të lidhni fenerët tuaj kur t'i instaloni në vend, pastaj të shtrëngoni bulonat dhe vendosni qilimin në vend. Tani gjithçka që ju duhet të bëni është të largoheni disa hapa prapa dhe do të admirojnë punën tuaj!
Hiqni të gjitha dritat e pasme. Në mënyrë që të pikturoj dritat tuaja, do t'ju duhet t'i hiqni ato me një makinë. Për ta bërë këtë, hapni trungun dhe lëvizni qilimin. Në çdo fanar duhet të jetë dy bulona të fiksimit. Hiqni ato. Shkyçni fuqinë e llambave para se të arrini fenerët. Për ta bërë këtë, tërhiqni telat e telave që janë të lidhur me llambat. Ju mund të keni për të bashkëngjitur disa përpjekje. Tani ju mund të tërhiqni plotësisht fenerët e pasmë.
Fenerët e rërës. Para pikturimit të dritave, ju duhet të rërë ato për të dhënë një sipërfaqe të duhur për bojë nga mundet. Gërminë e lagësht 800 madhësi dhe trite sipërfaqen e dritës derisa të bëhet një baltë dhe i lënë pas dore. Ju gjithashtu mund të përdorni detergjent. Përsëriteni procedurën për çdo dritë. Pas diplomimit, fshijeni të thatë dhe vazhdon dritën duke përdorur një leckë ose një pecetë. Kontrolloni uniformën e sipërfaqes.
Ne përdorim filmin vetë-ngjitës
Zgjidhni filmin tuaj me ngjyra. Filmi është një sy shumë i mirë i ngjyrës së fenerëve të pasmë, pasi ajo mungon drita me pamje nga filmi dhe bllokon dritën duke shkuar brenda saj. Ka një numër të madh të filmave të ndryshëm të shitura në internet ose dyqane të aksesorëve të makinave.
Pastroni sipërfaqen e fenerëve të pasmë. Para aplikimit të filmit, sigurohuni që fenerët tuaj janë shumë të pastra, është shumë e rëndësishme. Përdorni lëngun për të larë dritaret dhe një pecetë mikrofibroibro (që lë villusin) për të hequr ndotjen dhe divorcin nga uji.
Pritini filmin me madhësi të përafërt. Në varësi të madhësisë së filmit, mund të dëshironi të shkurtoni një segment më të saktë të filmit për të lehtësuar punën me të. Për ta bërë këtë, përdorni një thikë të mprehtë në rritje.
Hiqni shtresën mbrojtëse të filmit. Ndani shtresën mbrojtëse nga filmi dhe spërkatni anën ngjitëse me një zgjidhje sapuni ose një zgjidhje të alkoolit, ku 85% ujë, dhe 15% është një alkool duke përdorur një shishe me një spërkatës. Dënon shkopin e filmit para se ta instaloni atë në vendin që ju nevojitet në kokën e pasme.
Si mund të tonizoni dritat e pasme me duart tuaja, çfarë duhet të më duhet dhe cilat vështirësi të këtij procesi mund të jenë? Si i takon policia e trafikut me ngjyrën e dritave të pasme dhe a është e mundur të kalojë ato inspektim me një akordim të tillë? Konsideroni të gjitha pyetjet për ngjyrosjen e dritave të pasme.
Një mënyrë popullore dhe shumë e thjeshtë për të bërë makinën tuaj që po largohet është për të tonizuar optikën. Linja e dritave të pasme nga Vaz e familjes së dhjetë është veçanërisht e popullarizuar, sepse me fenerë në të njëjtën linjë ka një makinë me rrota të pasme, e cila ju lejon të merrni një shirit monophonic.
Ju mund të tonizoni dritat e pasme në dy mënyra:
- Llak për fenerët.
- Film.
Toning dritat e pasme llak
Për headlamps tinting, ju mund të përdorni bojë aerosol, por jo atë që përdorni për karrocë, por të veçantë për fenerët. Në dyqan, ajo quhet "llak toning për fenerë".Çmimi i llakut për ngjyrosjen, ose më mirë një mund të rreth 300r. Mjafton për ngjyrosjen e të dy drita të pasme me interes.
Ju mund të blini llak në dyqanet online ku bojë aerosol shitet për të pikturuar trupin e makinës.
Për të tonizuar dritat e pasme, jo domosdoshmërisht xhiruar ato, ju mund të pikturoj ato të drejtë me makinë:
Dhoma duhet të jetë e pastër, pa pluhur dhe me temperaturë dhome.
Përgatitni dritat nën pikturë, të pastër dhe të degrease. Është e nevojshme për të pikturuar tullumbace, si dhe kur të pikturohen pjesët e trupit, që është, në një distancë të mjaftueshme (në mënyrë që bojë të mos dyshojë) dhe në disa shtresa (në mënyrë që tonizimi të jetë uniform). Midis shtresave duhet të jetë një fragment prej rreth 10-20min. Së fundi, llak nga kulmi është i ngrirë në varësi të temperaturës (përafërsisht nga 12 orë deri në 24 orë). Para se të përdorni ngjyrën e aerosolit, lexoni udhëzimet në tullumbace.
Sa më shumë shtresa të llakut toning ju do të aplikoni, më pak dritë do të kalojë nëpër xhamin e fanar. Për shembull, për ngjyrosjen e lehtë (të dobët), fenerët janë të mjaftueshme 2 shtresa.
Dhe për ngjyrosjen e fortë të fanarit, numri i shtresave mund të arrijë 10-20.
Pas pikturës, xhami mund të jetë i lëmuar, atëherë toning do të bëhet më uniforme, do të fillojnë defekte të vogla (fazat e gishtërinjve, etj.).
Për të ndërtuar dritat, ju duhet të përdorni një mjet heqës llak, të cilat zakonisht shiten në të njëjtin departament ku vetë llakja e toning është. Ose të fshini ngjyrën me fenerët aceton.
Disavantazhet e lanternave të ngjyrosura (në varësi të cilësisë së llakut):
- Toning mund të larë me kalimin e kohës.
- Pas heqjes së bojës së sipërfaqes, do të ketë të përafërt dhe me baltë.
Dritat e pasme të ngjyrave të videos
Toning dritat e pasme film
Tinted nga filmi elektrik dore është një vështrim më i fundit në ngjyrë. Për ta bërë këtë, ju mund të përdorni filma të ndryshëm (kompanitë 3m, orakull, etj.).Ju mund të blini një film në agjencitë reklamuese.
Çmimi i filmit është i ndryshëm në varësi të cilësisë dhe kompanisë së prodhuesit ..
Kur zgjedhni një film, ju duhet t'i kushtoni vëmendje rezistente ndaj dritës.
Hiq ose jo llambat për filmin tinting përsëri në vullnet.
Kërkesa dhe dhomë të ngjashme (të ngrohtë dhe pa pluhur)
Duhet të jetë doned duke përdorur teknologjinë e ngjyrosjes konvencionale të syzeve, qelqi duhet të jetë i pastër dhe i ulët.
Shembull, filmi i ndezur i pasmë 3m (toning dritë)
Shembull, tinted nga filmi Oracal 8300 (toning fortë)
Linja e filmit elektrik dore është proces më kompleks sesa lustrimi i lyerjes, por në kontrast me llakun e ngjyrosjes, në këtë rast është e mundur të hiqni tonizimin në pa dhimbje. Për të ndërtuar syzet, do të jetë e nevojshme thjesht të hiqni ngjyrën, duke e pikuar atë për tip. Pas heqjes së filmit, nuk mbetet gjurmë dhe dritarja merr pamjen e mëparshme.
Video Tinting dritat e pasme film
Dritat e pasme të lyerjes së pjesshme
Gjithashtu ju mund të pikturoj ose toned dritat pjesërisht. Nëse një llak aerosol përdoret për toning, atëherë vendi në fanar, i cili do të riveted pa toning, dhe pasi tinting është hequr.Nëse filmi përdoret për të ngjyrosur një film, pastaj pas toning, një pjesë e filmit është prerë me një thikë shkrimi.
Përveç pamjes së bukur të pasme (dhe çfarë tjetër është e nevojshme :)) Ju merrni një dritë të ndritshme të fenerë, të cilat do të jenë të dukshme nga makina e ndjekur.
Jo dritat e pasme të ngjyrosura
Përveç ngjyrosjes së zezë të fenerëve, ju mund të përdorni llak tonik të kuqe ose ndonjë ngjyrë tjetër. Ekziston edhe një film për ngjyrosjen e ngjyrave të ndryshme. Këtu është zgjedhja e vullnetit.Toning e llambave / fenerëve dhe policisë së trafikut
Nëse dritat e pasme nuk janë shumë, atëherë në shumicën e rasteve, policia e trafikut nuk i kushton vëmendje kësaj, por nëse dëshiron, ata mund të gjejnë fytyrë. Sa më e fortë dritat e pasme të tonizuara, aq më e madhe është probabiliteti që ata nuk do të injorohen :)Ju gjithashtu nuk duhet të harroni se për të kaluar ato inspektim me llambat e pasme të tonned do të jetë gjithashtu e lehtë.
Cila është dënimi për ngjyrosjen e dritave të pasme?
12.5 h. 1 Kodi Administrativ: "Menaxhmenti i TC në praninë e gabimeve ose kushteve nën të cilat në përputhje me dispozitat kryesore për pranimin e automjeteve për të vepruar dhe detyrimet e zyrtarëve për të siguruar funksionimin e sigurisë rrugore të automjetit është i ndaluar" - a Paralajmërim ose një gjobë prej 500 rubla (në këtë moment).
Pas një aksidenti, fenerët e dendur mund të luajnë jo në favorin tuaj, veçanërisht nëse ky moment është fotografuar dhe i specifikuar në protokoll.
Në mënyrë që dritat e lehta përmes ngjyrosjes, mund të provoni të instaloni llamba më të fuqishme ose
Popullariteti më i madh është filmi toning. Sepse procesi i ngjyrosjes është mjaft i thjeshtë. Pra, është e mundur për të tonizuar fenerët pa vështirësi dhe në mënyrë të pavarur, duke mos iu referuar ndihmës së profesionistëve. Përveç kësaj, me kalimin e kohës, filmi boning ose i prishur mund të hiqet në mënyrë të pavarur.
Pluses e filmit tinting:
Së pari, aplikimi cilësor i filmit do të sigurojë transmetim uniform të dritës, i cili do të përmbushë rregullat dhe normat e kërkuara (përshkueshmëria e trafikut prej rreth 90%).
Së dyti, filmi do të mbrojë dritën nga dëmtimet e vogla (patate të skuqura dhe gërvishtjet). Përveç kësaj, gjatë operacionit, një headlamp toned me film me cilësi të lartë mund të jetë i lëmuar.
Si të ngjyrosni llambën e pasme me duart tuaja?
Procesi i ngjitjes fillon me gjatësinë e gjatësisë dhe gjerësisë së fenerëve. Tjetra ju duhet të shkurtoni materialin e dëshiruar Madhësia, duke marrë parasysh kompensimin (rreth 2 centimetra në anën). Tani mund të vazhdoni të punoni. Për një fillim, degrease dritat me ansilicone. Për të rregulluar lehtë materialin, drita duhet të spërkatet nga një zgjidhje sapuni nga spërkatës. Dhe vetëm atëherë ne aplikojmë një film në fenerët dhe formojmë atë, me ndihmën e një Rochel dhe një tharëse ndërtimi, nga qendra në skajet. Shumë vëmendje duhet t'i kushtohet skajeve, duke rrotulluar me kujdes filmin në bends. Filma e tepruar me shumë kujdes, në mënyrë që të mos dëmtojë dritën, prerjen me një thikë të mprehtë. Tjetra, ngrohja dhe furnizimi i filmit rreth perimetrit të dritës. Dhe në fund të punës, ne fshijmë filmin me një agjent që përmban alkool.
Hiq filmin është mjaft i thjeshtë. Është e nevojshme për të marr në mënyrë të rregullt buzë të filmit dhe ngrohjes tharëse flokësh, xhiruar. Është e nevojshme të ngroheshim në mënyrë që filmi të mos do të ishte. Pas heqjes së ngjyrës, dritarja fiton pamjen fillestare, pa asnjë gjurmë.
Besohet se kur tonizimi i ngarkuar, shkalla e trafikut është më e ulët se kur tonizimi i filmit. Po, dhe fenerët me cilësi të lartë llak në shtëpi është mjaft problematike. Përveç kësaj, duke zgjedhur një llak në dyqan në mënyrë të pavarur ju mund të merrni rezultatin e kundërt. Në vend të fenerë të bukur me shkëlqim, fenerët e matta mund të pista. Kur zgjedhni këtë metodë, ngjyrosja është më e mira për të kërkuar ndihmë nga specialistët. Duhet gjithashtu të kihet parasysh se praktikisht nuk është e pamundur për të hequr lyerjen e tillë pa pasoja për fenerët.
Tani filmi i pemëve të pasme të tabelave është shumë popullor në asnjë mënyrë jo vetëm në mesin e të dashuruarve të akordimit të automobilave. Sigurisht, shumë të përpiqen të tonizojnë optikën para së gjithash në mënyrë që makina të duket elegant, të dalë në rrjedhën e rrugës, tërhoqi vëmendjen e të tjerëve. Por toning e fenerëve me një film të veçantë polimer ka një vlerë të rëndësishme utilitare: veshja mbron xhamin e instrumenteve të lehta nga gërvishtjet dhe dëmtimet mekanike.
Sa donte fjetjet e përparme dhe të pasme të filmit?
Figura e përparme e dritës është një proces relativisht i thjeshtë, megjithëse kërkon aftësi të caktuara dhe saktësi të madhe.
- Fillon me faktin se sipas kritereve të tilla, si ngjyra dhe trashësia, vetë materiali është zgjedhur.
- Pas kësaj, janë përgatitur fenerët. Ata pastrohen tërësisht nga ndotja, lani dhe degreq.
- Tjetra, me ndihmën e gërshërë të mprehtë ose një thikë të rregullt shkrimi, një pjesë e madhësisë së filmit është prerë se drita (që është, me një diferencë).
- Ajo zbatohet në sipërfaqen e xhamit, është fiksuar fort në të, dhe pastaj me kujdes, për të shmangur formimin e flluska të ajrit, zbut në drejtim të qendrës në skajet.
- Në zonat e rrumbullakosura, filmi është pak i shtrirë për të hedhur më mirë. Për zbutjen e saj, ju mund të përdorni tharëse flokësh ndërtimi.
- Pasi dritarja është e mbuluar plotësisht, tejkalimi i filmave ekzistues në skajet janë të prera me kujdes.
Toning dritat e pasme janë bërë në pikërisht të njëjtën teknologji.
Avantazhet e ngjyrosjes së një qethje
- Mbrojtja e sipërfaqes së dritës nga dëmtimi dhe çipi
- Dritë të lartë të dritës
- Ju mund ta hiqni filmin në çdo kohë.
- Pamja individuale e makinës suaj
Çfarë është më e mirë: Tinging fenerët me një film apo llak?
Për dritat e ngjyrosura, jo vetëm filmi, por edhe llak i veçantë është përdorur. Përgatitja e optikës ndodh në të njëjtën mënyrë (pastrimi, shpërthimi, degreasing), dhe pastaj është pikturuar thjesht. Kostoja e ngjyrosjes së tillë është dukshëm më e ulët se lustrimi i filmit, por kjo metodë ka të meta të konsiderueshme:
- Për punë, fenerët duhet të çmontohen;
- Mbuloni llakun e xhamit është edhe shumë i vështirë;
- Llak kalon më pak dritë se filmi;
- Llak nën ndikimin e rrezatimit ultravjollcë gradualisht, por në mënyrë të qëndrueshme, të shkatërruar.
Përveç kësaj, nëse ka nevojë për të "ndërtuar" fenerët, filmi është shpejt dhe thjesht është hequr, por është pothuajse e pamundur për të hequr llak pa dëmtuar optikën. Natyrisht, drita e Vaz mund të zëvendësohet thjesht nga një i ri, por çmimi i një instrumenti të ngjashëm për një makinë të huaj është ende mjaft i lartë.
Shembuj të punës sonë
Skema e punës
1
Ju regjistroni
në një kohë të përshtatshme.
2
Kryej
punoni me ju.
3
Ju merrni
Makinë e përditësuar!
Përkundër faktit se procedura e ngjyrosjes së fenerëve të automobilave është mjaft e thjeshtë, është ende më mirë të besosh këtë punë nga profesionistët. Specialistët tanë kanë përvojë të jashtëzakonshme në këtë biznes, të gjitha procedurat e ngjyrosjes kryhen shpejt dhe me një garanci. Për të gjetur se sa kushton kjo shërbim, mjafton vetëm të njiheni me listën tonë të çmimeve ose të na telefononi - ne do t'ju shkruajmë në çdo kohë të përshtatshme, sepse disa nga qendrat tona punojnë 24 orë në ditë!
Çdo pronar i makinave dëshiron që makina e tij të duket elegant dhe shërbehet si zili për të tjerët. Kjo mund të ndihmojë mënyrat e ndryshme: ngjyra spektakolare, polyroli, stickers vinyl dhe gjëra të tjera. Megjithatë, duke çuar në rendin e trupit dhe syzeve, nuk duhet të harrojmë për fenerët e pasmë. Megjithëse nuk janë elementi kryesor në automjet, por tërheqin vëmendjen e shoferëve dhe kalimtarëve të tjerë. Prandaj, headlampat e pasme të ngjyrosura nuk do të jenë të tepërta nëse doni të jepni një makinë një pamje ekskluzive.
Metodat e Tinging
Duhet të mbahet mend se punonjësit e GAI mund të shkruajnë një gjobë për ngjyrosjen e pahijshme. Ai nuk ka të bëjë fare me ndëshkimin për ngjyrosjen e xhamit, por sasia e gjobës është e njëjtë. Kjo është arsyeja pse disa njerëz lënë fenerët në formë të parë në mënyrë që të mos kontaktoni ligjin. Nuk është mjaft vendimi i duhur, sepse është e mjaftueshme për të ditur se çfarë është e lejuar, dhe çfarë nuk është, dhe pastaj ju mund të bëni me siguri akordimin e makinës me duart tuaja. Ajo jo vetëm që do të bëjë llojin e makinës më moderne, por gjithashtu mbron fenerët nga kruarja dhe clouding. Sipërfaqja e tyre do të bëhet e qetë, veçanërisht nëse ato mbulohen me një film të veçantë.
Ju mund të nxjerrë në pah dy metoda kryesore të ngjyrosjes me duart tuaja:
- Pikturë. Kjo metodë konsiderohet më ekonomike, por jo e lehtë. Ne do të duhet të para-pastrojmë fenerët, nëse është e nevojshme, të ndotin dhe vetëm atëherë bojë. Për ta bërë këtë, do të duhet shumë kohë, dhe rezultati nuk del gjithmonë si dëshiron të shohë. Prandaj, zgjidhet vetëm ata që nuk duan të shpenzojnë shumë para në akordim.
- Viting Vinyl Film. Kjo metodë është shumë më e shpejtë se ajo e mëparshme dhe më e lehtë. E vetmja gjë që mund të duket e vështirë është të aplikoni filma filmash pa folda. Avantazhet e tij mund t'i atribuohen faktit se filmi mund të hiqet në çdo kohë dhe fenerët do të jenë në formën e tij origjinale. Ka hije të ndryshme të këtij materiali, kështu që ju mund të gjeni të përsosur të përshtatshme për një makinë të veçantë.
Cila nga këto metoda toning ju zgjidhni me duart tuaja, vendos çdo shofer për veten tuaj. Ata të dy kanë avantazhet dhe disavantazhet e tyre, dhe ndryshojnë me çmimin dhe shpejtësinë e aplikimit. Ata që kursen kohën e tyre, rekomandohet që të zgjidhni ngjyrosjen me një film.
Si të vendosni bojë ose llak me duart tuaja?
Nëse është vendosur të toned fenerët me llak, do të jetë e nevojshme për të filluar blerjen e një mjeti të veçantë. Rekomandohet të japësh preferencë për toning llak që është i përshtatshëm për t'u përdorur. Çmimi i saj mund të jetë i lartë, por rezultati do të jetë më i mirë, dhe ka mjaft një mund.
Toning është kryer në disa faza. Para së gjithash, fenerët duhet të hiqen në mënyrë që mjeti të jetë lehtësisht i qetë. Duhet të kihet parasysh se ata do të duhet të instalohen mbrapa, dhe është e nevojshme të jetë në gjendje të bëjë. Hapi i ardhshëm është të zhvendosni kokën e dritës, kjo do të kërkojë alkool ose mjete të veçanta. Pas procedurës, ju duhet të jepni veshjen për të thatë.
Para spërkatjes, tullumbace do të jetë e nevojshme për të dridhur, atëherë ju mund të aplikoni bojë me një shtresë të hollë dhe të butë. Pas kësaj, ju duhet të jepni në qendër të vëmendjes, ndërsa ju nuk duhet të bini mbi të. Pastaj ju duhet të aplikoni një ose më shumë shtresa, duke mos tejkaluar normat e rezistencës ndaj dritës. Kur fenerët janë të thatë, ata duhet të jenë të lëmuar në shkëlqim të pasqyrës dhe të kthehen në makinë.
Si të ngjyrosni fenerët me një film?
Për ta bërë këtë, do t'ju duhet një tharëse flokësh ndërtimi, një thikë të mprehtë, zgjidhje alkooli dhe një shpatull. Së pari ju duhet të pastroni fenerët, duke hequr lagështi me ta me ndihmën e një indi të mikrofibrave dhe një agjent të veçantë pastrimi. Pas kësaj, ju duhet të llak për zgjidhjen e alkoolit në film dhe fenerët në mënyrë që ata të jenë më të lehtë për tonied.
Në mënyrë që filmi të jetë i sheshtë në formën e fenerëve, duhet të shtrihet, e cila mund të bëhet me duart tuaja duke përdorur një tharëse ndërtimi. Filmi duhet të nxehet në mënyrë që të bëhet fleksibël, por është e rëndësishme të mos e teproj, përndryshe do të shfaqen rrudhat.
Faza tjetër është më e rëndësishmja: ju do të duhet të merrni një shpatull dhe me ndihmën e saj për të tërhequr materialin dhe për të mbuluar fenerët. Çdo gjë që del për buzën e jashtme duhet të pritet me një thikë. Është e nevojshme për ta bërë atë me duart tuaja, në mënyrë që të mos dëmtojë fenerët. Kjo procedurë do të përfundojë.
Financitë për fenerët e ngjyrosur
Siç e dini, u prezantua një ndalim për ngjyrosjen e tepruar të frenave. Kjo është bërë për qëllime të sigurisë, pasi dukshmëria u zvogëlua, dhe shoferi nuk mund të vërente këmbësorët gjatë natës ose ndonjë objekt. Fenerët nuk ndikojnë në shqyrtimin për shoferin, por nëse ato duhet të jenë të dendura gabimisht, ju nuk mund të merrni vetëm një sasi të caktuar gjobë, por edhe të vështirë për të lëvizur automjete të tjera, veçanërisht ato që shkojnë prapa.
Me ligj, lejohet të ketë dritat e kundërt të pajisjeve të bardha dhe të tjera të ndriçimit, duke lëshuar të verdhë, portokalli dhe të kuqe. Filmi dhe bojë mund të ndryshojnë hijen, kështu që ju duhet të kujdeseni, përndryshe ju duhet të paguani 500 rubla. Nga rruga, një aksident mund të ndodhë nga përdorimi i sinjaleve të stoprave të ngjyrosura dhe shoferi njoh shoferin që vendosi të dinin fenerët e tij. Pastaj dënimi do të duhet të paguajë, dhe shumën për riparimin e automjetit të prekur.