Treguesi i ngarkimit të baterisë është një gjë e nevojshme në ekonominë e çdo shoferi. Rëndësia e një pajisjeje të tillë rritet shumë herë kur, në një mëngjes të ftohtë dimri, makina, për ndonjë arsye, refuzon të fillojë. Në këtë situatë, ia vlen të vendosni nëse do të telefononi një mik në mënyrë që ai të vijë dhe të ndihmojë në fillimin e baterisë së tij, ose bateria e urdhëruar të jetojë për një kohë të gjatë, pasi është shkarkuar nën një nivel kritik.
Pse të monitoroni shëndetin e baterisë?
Bateria e makinës përbëhet nga gjashtë bateri të lidhura në seri me një tension furnizimi 2.1 - 2.16 V. Normalisht, bateria duhet të japë 13 - 13.5 V. Nuk duhet të lejohet një shkarkim i konsiderueshëm i baterisë, pasi kjo zvogëlon densitetin dhe, në përputhje me rrethanat, rritet temperatura e ngrirjes së elektrolitit.
Sa më i lartë të jetë konsumimi i baterisë, aq më pak kohë mban një karikim. Në sezonin e ngrohtë, kjo nuk është kritike, por në dimër, dritat e shënjimit, të harruara në gjendjen e ndezur, në kohën kur kthehen, mund të "vrasin" plotësisht baterinë, duke e kthyer përmbajtjen në një copë akulli.
Në tabelë mund të shihni temperaturën e ngrirjes së elektrolitit, në varësi të shkallës së ngarkesës së njësisë.
Varësia e temperaturës së ngrirjes së elektrolitit nga shkalla e ngarkimit të baterisë | ||||
---|---|---|---|---|
Dendësia e elektrolitit, mg/cm. kubik | Tensioni, V (pa ngarkesë) | Tensioni, V (me një ngarkesë prej 100 A) | Shkalla e ngarkimit të baterisë,% | Pika e ngrirjes së elektrolitit, gr. Celsius |
1110 | 11,7 | 8,4 | 0,0 | -7 |
1130 | 11,8 | 8,7 | 10,0 | -9 |
1140 | 11,9 | 8,8 | 20,0 | -11 |
1150 | 11,9 | 9,0 | 25,0 | -13 |
1160 | 12,0 | 9,1 | 30,0 | -14 |
1180 | 12,1 | 9,5 | 45,0 | -18 |
1190 | 12,2 | 9,6 | 50,0 | -24 |
1210 | 12,3 | 9,9 | 60,0 | -32 |
1220 | 12,4 | 10,1 | 70,0 | -37 |
1230 | 12,4 | 10,2 | 75,0 | -42 |
1240 | 12,5 | 10,3 | 80,0 | -46 |
1270 | 12,7 | 10,8 | 100,0 | -60 |
Një nivel kritik i ngarkimit konsiderohet të jetë nën 70%. Të gjitha pajisjet elektrike të automobilave nuk konsumojnë tension, por rrymë. Pa ngarkesë, edhe një bateri shumë e shkarkuar mund të tregojë tension normal. Por në një nivel të ulët, gjatë fillimit të motorit, do të ketë një "tërheqje" të fortë të tensionit, i cili është një sinjal alarmi.
Është e mundur të vërehet një katastrofë që po afrohet në kohën e duhur vetëm kur një tregues instalohet direkt në kabinë. Nëse gjatë funksionimit të makinës sinjalizon vazhdimisht për shkarkimin - është koha për të shkuar në stacionin e shërbimit.
Cilët janë treguesit
Shumë bateri, veçanërisht ato pa mirëmbajtje, kanë një sensor të integruar (higrometër), parimi i të cilit bazohet në matjen e densitetit të elektrolitit.
Ky sensor monitoron gjendjen e elektrolitit dhe vlera e treguesve të tij është relative. Nuk është shumë i përshtatshëm të ngjitesh nën kapuçin e makinës disa herë për të kontrolluar gjendjen e elektrolitit në mënyra të ndryshme funksionimi.
Për të monitoruar gjendjen e baterisë, pajisjet elektronike janë shumë më të përshtatshme.
Llojet e treguesve të ngarkimit të baterisë
Dyqanet e makinave shesin shumë pajisje të tilla, të ndryshme në dizajn dhe funksionalitet. Pajisjet e fabrikës ndahen me kusht në disa lloje.
Mënyra e lidhjes:
- te priza e çakmakut;
- në rrjetin në bord.
Me anë të shfaqjes së sinjalit:
- analoge;
- dixhitale.
Parimi i funksionimit është i njëjtë për ta, duke përcaktuar nivelin e ngarkimit të baterisë dhe duke shfaqur informacionin në një formë vizuale.
Diagrami skematik i treguesit
Si të bëni një tregues të baterisë LED?
Ka dhjetëra skema të ndryshme kontrolli, por ato japin të njëjtin rezultat. Një pajisje e tillë mund të montohet në mënyrë të pavarur nga materialet e improvizuara. Zgjedhja e një qarku dhe komponentësh varet vetëm nga aftësitë tuaja, imagjinata dhe diapazoni i dyqanit më të afërt të radios.
Këtu është një diagram për të kuptuar se si funksionon treguesi i baterisë LED. Një model i tillë portativ mund të montohet "në gju" në pak minuta.
D809- një diodë zener 9V kufizon tensionin në LED, dhe vetë diferencuesi është mbledhur në tre rezistorë. Një tregues i tillë LED shkaktohet nga rryma në qark. Në një tension prej 14 V dhe më lart, forca aktuale është e mjaftueshme për të ndezur të gjitha LED, në një tension prej 12-13,5 V ato shkëlqejnë VD2 Dhe VD3, nën 12 V - VD1.
Një version më i avancuar me një minimum pjesësh mund të montohet në një tregues të tensionit të buxhetit - çipi AN6884 (KA2284).
Skema e treguesit led të nivelit të ngarkimit të baterisë në krahasuesin e tensionit
Qarku funksionon në parimin e një krahasuesi. VD1- një diodë zener 7.6V, shërben si një burim i tensionit referues. R1- ndarës i tensionit. Gjatë konfigurimit fillestar, vendoset në një pozicion të tillë që në një tension prej 14 V të ndizen të gjitha LED. Tensioni i furnizuar në hyrjet 8 dhe 9 krahasohet përmes një krahasuesi dhe rezultati deshifrohet në 5 nivele duke ndezur LED-të përkatëse.
Kontrolluesi i ngarkimit të baterisë
Për të monitoruar gjendjen e baterisë ndërsa ngarkuesi është në punë, ne bëjmë një kontrollues të ngarkimit të baterisë. Skema e pajisjes dhe komponentët e përdorur janë sa më të aksesueshme, duke siguruar në të njëjtën kohë kontroll të plotë mbi procesin e rimbushjes së baterive.
Parimi i funksionimit të kontrolluesit është si më poshtë: ndërsa voltazhi në bateri është më i ulët se tensioni i ngarkimit, LED jeshil është i ndezur. Sapo voltazhi të jetë i barabartë, transistori hapet, duke ndezur një LED të kuq. Ndryshimi i rezistencës përpara bazës së tranzitorit ndryshon nivelin e tensionit të kërkuar për të ndezur tranzitorin.
Ky është një qark kontrolli universal që mund të përdoret si për bateritë e fuqishme të makinave ashtu edhe për bateritë miniaturë të litiumit.
“U mor një koment me sugjerime interesante për finalizimin e dizajnit.
Meqenëse këshillohet përdorimi i treguesit të shkarkimit të baterisë (paragrafi 3 i komentit) në çdo pajisje elektronike autonome, për të shmangur dështimet e papritura ose dështimin e pajisjeve në momentin më të papërshtatshëm kur bateria shkarkohet, prodhimi i treguesit të shkarkimit është bërë në një artikull të veçantë.
Përdorimi i një treguesi të shkarkimit është veçanërisht i rëndësishëm për shumicën e baterive të litiumit me një tension nominal prej 3,7 volt (për shembull, bateritë 18650 që janë të njohura sot dhe bateritë e ngjashme ose të zakonshme të sheshta Li-ion nga telefonat që zëvendësohen nga telefonat inteligjentë), sepse . ata vërtet "nuk e pëlqejnë" një shkarkim nën 3.0 volt dhe dështojnë në të njëjtën kohë. Vërtetë, shumica e tyre duhet të kenë të integruar qarqet e mbrojtjes emergjente nga shkarkimi i thellë, por kush e di se çfarë lloj baterie keni në duar derisa ta hapni (Kina është plot mistere).
Por më e rëndësishmja, do të doja të dija paraprakisht se çfarë ngarkimi është aktualisht i disponueshëm në baterinë e përdorur. Më pas mund ta lidhim karikuesin në kohë ose të vendosim një bateri të re pa pritur pasojat e trishtueshme. Prandaj, ne kemi nevojë për një tregues që do të japë një sinjal paraprakisht se bateria së shpejti do të ulet plotësisht. Për të zbatuar këtë detyrë, ekzistojnë zgjidhje të ndryshme qarku - nga qarqet në një transistor të vetëm deri te pajisjet e zbukuruara në mikrokontrolluesit.
Në rastin tonë, propozohet të bëhet një tregues i thjeshtë i shkarkimit të baterive të litiumit, i cili montohet lehtësisht me dorë. Treguesi i shkarkimit është ekonomik dhe i besueshëm, kompakt dhe i saktë në përcaktimin e tensionit të kontrolluar.
Qarku i treguesit të shkarkimit
Qarku është bërë duke përdorur të ashtuquajturit detektorë të tensionit. Ata quhen gjithashtu monitorë të tensionit. Këto janë mikroqarqe të specializuara të krijuara posaçërisht për kontrollin e tensionit. Përparësitë e padiskutueshme të qarqeve në monitorët e tensionit janë konsumi jashtëzakonisht i ulët i energjisë në modalitetin e gatishmërisë, si dhe thjeshtësia dhe saktësia e tij ekstreme. Për ta bërë treguesin e shkarkimit edhe më të dukshëm dhe ekonomik, ne ngarkojmë daljen e detektorit të tensionit në një LED që vezullon ose një ndezës në dy transistorë bipolarë.
Detektori i tensionit (DA1) PS T529N i përdorur në qark lidh daljen (pin 3) e mikroqarkut me një tel të përbashkët, kur tensioni i kontrolluar në bateri bie në 3,1 volt, kjo përfshin energjinë në gjeneratorin e impulsit me funksion të lartë. Në të njëjtën kohë, LED super i ndritshëm fillon të pulsojë me një periudhë: pauzë - 15 sekonda, blic i shkurtër - 1 sekondë. Kjo redukton konsumin aktual në 0,15 ma në pauzë dhe 4,8 ma në blic. Kur voltazhi i baterisë është më shumë se 3.1 volt, qarku i treguesit praktikisht fiket dhe konsumon vetëm 3 uA.
Siç ka treguar praktika, cikli i treguar i treguesit është mjaft i mjaftueshëm për të parë sinjalin. Por nëse dëshironi, mund të vendosni një mënyrë më të përshtatshme për ju duke zgjedhur rezistencën R2 ose kondensatorin C1. Për shkak të konsumit të ulët të rrymës së pajisjes, nuk sigurohet një çelës i veçantë i furnizimit me energji elektrike për treguesin. Pajisja funksionon kur voltazhi i furnizimit bie në 2.8 volt.
Prodhimi i karikuesit
1. Set i plotë.
Ne blejmë ose zgjedhim nga komponentët e disponueshëm për montim në përputhje me skemën.
2. Montimi i qarkut.
Për të kontrolluar performancën e qarkut dhe cilësimet e tij, ne mbledhim treguesin e shkarkimit në një bord qarku universal. Për lehtësinë e vëzhgimit (frekuencë e lartë pulsi), për kohën e verifikimit, ne zëvendësojmë kondensatorin C1 me një kondensator me një kapacitet më të vogël (për shembull, 0.47 mikrofarad). Ne e lidhim qarkun me furnizimin me energji elektrike me aftësinë për të rregulluar pa probleme tensionin konstant në rangun nga 2 në 6 volt.
3. Kontrollimi i qarkut.
Uleni ngadalë tensionin e furnizimit të treguesit të shkarkimit, duke filluar nga 6 volt. Ne vëzhgojmë në ekranin e testuesit vlerën e tensionit në të cilën ndizet detektori i tensionit (DA1) dhe LED fillon të pulsojë. Me zgjedhjen e saktë të detektorit të tensionit, momenti i kalimit duhet të bëhet në rajonin prej 3.1 volt.
4. Përgatisim tabelën për montimin dhe bashkimin e pjesëve.
Presim një pjesë të nevojshme për montim nga një tabelë universale e qarkut të printuar, përpunojmë me kujdes skajet e tabelës me një skedar, pastrojmë dhe kallajoni gjurmët e kontaktit. Madhësia e pllakës që do të pritet varet nga pjesët e përdorura dhe shtrirja e tyre gjatë instalimit. Dimensionet e tabelës në foto janë 22 x 25 mm.
5. Montimi i qarkut të debuguar në tabelën e punës
Me një rezultat pozitiv në funksionimin e qarkut në tabelën e qarkut, ne i transferojmë pjesët në tabelën e punës, i bashkojmë pjesët dhe i kryejmë lidhjet e kabllove që mungojnë me një tel të hollë montimi. Në fund të montimit, ne kontrollojmë instalimin. Qarku mund të montohet në çdo mënyrë të përshtatshme, duke përfshirë montimin në sipërfaqe.
6. Kontrollimi i qarkut të punës së treguesit të shkarkimit
Ne kontrollojmë performancën e qarkut të treguesit të shkarkimit dhe cilësimet e tij duke e lidhur qarkun me furnizimin me energji elektrike, dhe më pas me baterinë në provë. Kur voltazhi në qarkun e energjisë është më pak se 3.1 volt, treguesi i shkarkimit duhet të ndizet.
Në vend të detektorit të tensionit (DA1) PS T529N të përdorur në qark për një tension të kontrolluar prej 3,1 volt, është e mundur të përdoren mikroqarqe të ngjashme nga prodhues të tjerë, për shembull BD4731. Ky detektor ka një dalje kolektori të hapur (siç dëshmohet nga numri shtesë "1" në përcaktimin e mikrocirkut), dhe gjithashtu kufizon në mënyrë të pavarur rrymën e daljes në 12 mA. Kjo ju lejon të lidhni një LED direkt me të, pa kufizuar rezistorët.
Është gjithashtu e mundur të përdoren detektorë 3,08 volt në qark - TS809CXD, TCM809TENB713, MCP103T-315E / TT, CAT809TTBI-G. Është e dëshirueshme të specifikohen parametrat e saktë të detektorëve të tensionit të zgjedhur në fletën e tyre të të dhënave.
Në mënyrë të ngjashme, mund të aplikoni një detektor tjetër tensioni në çdo tension tjetër të nevojshëm për funksionimin e treguesit.
Vendimi për pjesën e dytë të pyetjes në paragrafin 3 të komentit të mësipërm - funksionimi i treguesit të shkarkimit vetëm në prani të ndriçimit, është shtyrë arsyet e mëposhtme:
- funksionimi i elementeve shtesë në qark kërkon energji shtesë nga bateria, d.m.th. efikasiteti i skemës vuan;
- funksionimi i treguesit të shkarkimit gjatë ditës, më shpesh, është i padobishëm, sepse. nuk ka "spektatorë" në dhomë, dhe deri në mbrëmje ngarkimi i baterisë mund të përfundojë;
- funksionimi i treguesit në errësirë është më i ndritshëm dhe më efikas, dhe ka një ndërprerës të energjisë për të fikur shpejt pajisjen.
Përdorimi i amplifikatorit operacional të brendshëm të propozuar në paragrafin 2 të komentit nuk u mor në konsideratë, për shkak të korrigjimit të mënyrave të funksionimit të qarkut për rrymat minimale, në procesin e përfundimit në tabelën e qarkut.
Për të zgjidhur problemin sipas paragrafit 1 të komentit, ndryshova disi skemën e pajisjes "Llamba e natës me çelës akustik". Pse ndeza autobusin e fuqisë pozitive të stafetës akustike përmes një inverteri në VT3, të kontrolluar nga një stafetë fotografike që punon vazhdimisht.
Artikulli ofron dy opsione për treguesin, ngjyra e të cilave, ndërsa bateria shkarkohet, ndryshon nga jeshile në të kuqe. Ekzistojnë një numër i madh i qarqeve të krijuara për të kryer funksione të tilla, por të gjitha, për mendimin tim, janë shumë të ndërlikuara dhe të shtrenjta. Treguesi im kërkon vetëm pesë komponentë, njëri prej të cilëve është një LED me dy ngjyra.
Opsioni më i thjeshtë është paraqitur në figurën 1. Nëse voltazhi në terminalin B+ është 9V, do të ndizet vetëm LED i gjelbër, pasi tensioni në bazën e Q1 është 1.58 V, ndërsa tensioni në emetues, i barabartë me tensionin rënia nëpër LED D1, në një rast tipik është 1.8V dhe Q1 mbahet e mbyllur. Ndërsa bateria shkarkohet, voltazhi në LED D2 mbetet pothuajse i njëjtë, ndërsa voltazhi në bazë zvogëlohet dhe në një moment në kohë, Q1 do të fillojë të përçojë rrymë. Si rezultat, një pjesë e rrymës do të degëzohet në LED të kuqe D1, dhe kjo përqindje do të rritet derisa e gjithë rryma të rrjedhë në LED të kuqe.
Foto 1. | Qarku bazë i monitorimit të tensionit të baterisë. |
Për elementët tipikë të një LED me dy ngjyra, ndryshimi në tensionet e përparme është 0.25 V. Është kjo vlerë që përcakton rajonin e tranzicionit nga jeshile në të kuqe. Një ndryshim i plotë në ngjyrën e shkëlqimit, i vendosur nga raporti i rezistencave të rezistencave ndarëse R1 dhe R2, ndodh në diapazonin e tensionit
Mesi i rajonit të tranzicionit nga një ngjyrë në tjetrën përcaktohet nga diferenca e tensionit midis LED dhe kryqëzimit bazë-emetues të tranzistorit dhe është afërsisht 1.2 V. Kështu, ndryshimi i B + nga 7.1 V në 5.8 V do të ndryshojë ngjyrën e gjelbër. shkëlqejnë në të kuqe.
Dallimet e tensionit do të varen nga kombinimet specifike të LED-ve dhe mund të mos jenë të mjaftueshme për të ndërruar plotësisht ngjyrat. Megjithatë, qarku i propozuar mund të përdoret ende duke përfshirë një diodë në seri me D2.
Në figurën 2, rezistenca R1 është zëvendësuar nga një diodë zener, duke rezultuar në një rajon tranzicioni shumë më të ngushtë. Ndarësi nuk ndikon më në qark dhe një ndryshim i plotë në ngjyrën e shkëlqimit ndodh kur tensioni B + ndryshon me vetëm 0.25 V. Tensioni i pikës së tranzicionit do të jetë 1.2 V + V Z. (Këtu V Z është voltazhi në diodën zener, në rastin tonë është afërsisht 7.2 V).
Disavantazhi i një skeme të tillë është lidhja e saj me shkallën e tensionit të kufizuar të diodave zener. Situata e ndërlikuar më tej është fakti që diodat zener të tensionit të ulët kanë një thyerje shumë të qetë në karakteristikë, gjë që nuk ju lejon të përcaktoni me saktësi se cili do të jetë tensioni V Z në rryma të ulëta në qark. Një zgjidhje për këtë problem do të ishte përdorimi i një rezistence në seri me diodën zener për të lejuar një rregullim të lehtë duke rritur pak tensionin e kryqëzimit.
Me vlerat e rezistencës së treguar, qarku tërheq rreth 1 mA rrymë. Me LED me shkëlqim të lartë, kjo është e mjaftueshme për përdorim të brendshëm. Por edhe kjo sasi e vogël e rrymës është mjaft domethënëse për një bateri 9 volt, kështu që ju duhet të zgjidhni midis tërheqjes së rrymës shtesë dhe rrezikimit të lënies së energjisë kur nuk ju nevojitet. Me shumë mundësi, pas ndryshimit të parë të paplanifikuar të baterisë, do të ndjeni përfitimin e këtij monitori.
Qarku mund të konvertohet në atë mënyrë që kalimi nga shkëlqimi i gjelbër në të kuq të ndodhë në rast të rritjes së tensionit të hyrjes. Për ta bërë këtë, transistori Q1 duhet të zëvendësohet me NPN dhe emetuesi dhe kolektori duhet të ndërrohen. Dhe me ndihmën e një çifti transistorësh NPN dhe PNP, mund të bëni një krahasues me dritare.
Duke pasur parasysh rajonin mjaft të gjerë të tranzicionit, qarku në figurën 1 është më i përshtatshmi për bateritë 9V, ndërsa qarku në figurën 2 mund të përshtatet me tensione të tjera.
Pra, ju shihni një diagram qarku të një pajisjeje sinjalizuese të tensionit të ulët për një bateri makine me acid plumbi. Është shumë e rëndësishme të monitoroni ngarkimin e baterisë në mënyrë që të parandaloni shkarkimin e tepërt të baterisë, i cili është i mbushur me pasoja negative për baterinë tuaj të ringarkueshme, ne do të bëjmë një pajisje të thjeshtë që monitoron nivelin e tensionit në terminalet e baterisë.
Duke montuar një qark të thjeshtë dhe shumë të dobishëm të tingullit të shkarkimit, mund të mësoni shpejt për tensionin e ulët në terminalet e baterisë dhe të ndërmerrni veprime: ngarkoni atë me një karikues të zakonshëm të rrjetit ose përmes gjeneratorit të integruar në një automjet.
Skema përbëhet nga dy pjesë:
e para, monitorimi i diferencës së mundshme
Dhe i dyti është gjeneratori më elementar i zërit
. Le të analizojmë parimin e punës.
Së pari, një rezistencë e diodës zener dhe një rezistencë tjetër janë të lidhura në seri. Tensioni për të cilin është projektuar bie në diodën zener, në rastin tonë 10 V, dokumentacioni teknik i tij (1N4740A) tregon fuqinë maksimale prej 1 vat, tensioni i stabilizimit është 10 V (ZENER VOLTAGE RANGE), që do të thotë maksimale e lejueshme. rryma është 1W / 10V = 0,1A , por në fakt 91 mA (RRUMË RREGULLATOR), rryma nominale e stabilizimit është 25 mA (RRUMË TESTIMI).
Le të llogarisim rezistencën e dy rezistorëve. Siç e dini, kur lidhet në seri, rryma që kalon nëpër të gjithë elementët e qarkut është e njëjtë, por rënia e tensionit në komponentë të ndryshëm ndryshon. Sipas kushtit, rreth 10 V duhet të bjerë absolutisht në diodën zener, voltazhi maksimal në terminalet e baterisë është 14 V, që do të thotë se 14-10 = 4 V duhet të mbetet në total në dy rezistorë R = 4V / 25mA = 160 Ohm. Por në fakt, një konsum kaq i madh në punë është i papranueshëm për ne, kështu që marrim rezistorë me një rezistencë shumë më të madhe, si rezultat i së cilës rryma zvogëlohet dhe dioda zener do të bjerë më pak se 10 V. Zgjodha 20 kOhm konstante dhe variabël 3 kOhm. Konsumi aktual do të jetë vetëm rreth 200 µA.
Për të hapur tranzistorin VT1, duhet të aplikoni një plus në bazën e tij, dhe një minus në emetuesin, një tension prej rreth 0.7 V (në varësi të shembullit tuaj), rezistenca e poshtme R2 është përgjegjëse për këtë, përdoret një rezistencë e nënshkrimit. për akordim të imët.
Baza VT2 është e lidhur me kolektorin e tranzistorit VT1. Kështu, kur voltazhi është më shumë se normal (në bateri), VT1 është i hapur dhe baza e VT2 është e lidhur me negativin - është e mbyllur. Kur voltazhi në bateri bëhet më i vogël se norma (ju zgjidhni vetë normën), tranzistori i parë do të mbyllet dhe tani asgjë nuk e pengon të dytin të hapet përmes një rezistence 10 kΩ.
Analiza e gjeneratorit të dridhjeve të zërit: përbëhet nga dy transistorë me përçueshmëri të ndryshme. Supozoni se në momentin fillestar të kohës të gjithë transistorët (VT3 dhe VT4) janë të mbyllura për shkak të faktit se transistori PNP i jepet pozitiv përmes altoparlantit dhe kondensatorit. Sapo kondensatori të jetë i ngarkuar plotësisht, ai nuk do të përçojë më rrymë për të mbyllur më tej VT3, dhe tani asgjë nuk e pengon atë të hapet përmes rezistencës R4. Kur VT3 hapet përmes EC-së së tij, "plus" do të rrjedhë në bazën NPN VT4 dhe gjithashtu do të hapet - tani rryma rrjedh nëpër EC të transistorit të katërt dhe altoparlantit (ka një klikim). Gjatë këtij klikimi, kondensatori mbyllet përmes rezistencës dhe kryqëzimit të hapur të VT4 KE, natyrisht ai shkarkohet dhe ndodh kjo kohë e caktuar, e cila varet nga kapaciteti i vetë kondensatorit dhe vlera e rezistencës së rezistencës. Sapo të shkarkohet kondensatori, VT3 mbyllet përsëri përmes spirales së kokës dinamike dhe C1, dhe më pas gjithçka do të shkojë në të njëjtën mënyrë. Megjithë thjeshtësinë e gjeneratorit të tingullit RC, në praktikë nuk funksionon gjithmonë në mënyrë të qëndrueshme.
Rezistenca 100 ohm R5 këtu kufizon rrymën bazë të transistorit NPN.
Vendosja e skemës
Ne duhet ta bëjmë këtë: të lidhim një burim të rregullueshëm të energjisë në qark, pasi të vendosim tensionin të barabartë me 12 volt (që korrespondon me një shkarkim prej 75% pa ngarkesë të lidhur (mund të zgjidhni një vlerë tjetër, tabelën më poshtë) dhe të ndryshoni rezistencën e rezistenca e prerësit RV1, arrijmë që me një kthesë të vogël të bulonës së rezistencës, altoparlanti filloi të kërcëjë, ky është i gjithë cilësimi.
Kjo do të thotë, ne vendosim një tension të tillë midis bazës dhe emetuesit VT1, kur, me një shkarkim të papranueshëm, transistori mbyllet (transistori im ka një tension ngopjeje prej 658 mV) dhe me rritjen më të vogël të tensionit në bateri, rënia e tensionit në R2 rritet në mënyrë të pashmangshme dhe, rrjedhimisht, më shumë U furnizohet me BE VT1 BE - ai hapet duke mbyllur VT2.
Sigurohemi edhe një herë që konfigurimi të jetë i saktë duke ndryshuar tensionin LBP, duhet të jetë kështu: në U = 12V dhe më shumë, gjithçka është e qetë, dhe në U më pak se 12 V, lëshohet një kërcitje.
Qarku është shumë i thjeshtë dhe e montova duke përdorur komponentë të montimit sipërfaqësor, të cilët kontribuan në miniaturizimin maksimal të shalleve, me përmasa 24 me 13 mm. Konsumi në modalitetin offline është ~2 mA, dhe me një sinjal arrin 15-20 mA.
Shkarkimi i tabelës:
Rasti është një kuti plastike, në të cilën kam bërë një vrimë për sinjalizuesin.
Vendosa të postoj një tjetër sot. Përsëri, nuk pretendoj të jem "zbulim", pasi të gjitha biçikletat janë shpikur shumë kohë më parë! Vetëm një herë që do të fluturonim, nuk kishte fare tregues të shkarkimit të baterisë, kështu që duhej të shpiknim dhe të bënim urgjentisht pajisje në mënyrë që të mos prishnim bateritë. Po, pajisjet janë të thjeshta, nuk kanë një tweeter. Por LED-të super të ndritshme janë qartë të dukshme edhe në një ditë me diell, dhe për këtë arsye ne ishim të qetë për sigurinë e baterive. Pajtohem që pajisjet doli të ishin më të thjeshtat, në nivelin e viteve '80. megjithatë
ata përballen me sukses me detyrën! Shikoni, dikush do t'ju vijë në ndihmë!
Treguesi i shkarkimit të baterive Li Po.
Dihet që bateritë Li Po janë kundërindikuar për shkarkim nën 3.2 volt për kanaçe. Një shkarkim nën këtë vlerë çon në një dështim të shpejtë të baterisë. Prandaj, kontrolli i tensionit kufizues të shkarkimit të çdo qelize baterie është shumë i dëshirueshëm. ndërprerje
motori nga kontrolluesi i shpejtësisë nuk mund të garantojë fikjen në kohë
bateri. Prandaj, ka kuptim të aplikoni mbrojtje shtesë, e cila mund të përdoret si një tregues i shkarkimit të baterisë LED.
Në këtë qark, një diodë zener e rregullueshme me saktësi TL431 përdoret si krahasues. Pragu vendoset nga një ndarës i tensionit në qarkun RE (elektrodë kontrolli) prej 15 kΩ (rezistenca më e ulët në qark) dhe 4.3 kΩ (rezistenca e sipërme).
Me këtë raport të rezistorëve, funksionimi i diodës Zener TL431 ndodh në tension
bankat e kavanozit 3.2 volt. Kur voltazhi në bateri është në intervalin 3.2 .... 4.2 V,
Dioda Zener TL431 është e hapur, rënia e tensionit në të nuk mjafton që LED të funksionojë dhe është fikur. Kur tensioni i baterisë arrin 3.2 V, dioda zener mbyllet dhe LED ndizet nga rryma që rrjedh nëpër rezistencën 2 kΩ.
Treguesi përbëhet nga tre qeliza identike, të cilat ju lejojnë të kontrolloni bateritë 1S, 2S dhe 3S për qelizë. Kur shtoni një ose dy qeliza të tjera, 4S dhe 5S mund të kontrollohen
akumulatorë. Kam përdorur LED super të shndritshëm blu, më duken se janë më së shumti
të dukshme gjatë ditës. Alarmin e zërit e kam refuzuar, sepse zëri dëgjohet relativisht afër dhe nuk kam dashur të rris përmasat dhe peshën. Mjaft LED, veçanërisht
që pas uljes, ju ende e merrni modelin në duar dhe është e lehtë të mos vëreni përfshirjen e LED
e pamundur!
I mora kontaktet e pinit nga një tabelë elektronike e pavlefshme e hard drive me një ndërfaqe IDE.
Ato futen, natyrisht, në lidhësin e bilancit të baterisë. Lidhës balancues i
E nxjerr nga kutia e modelit për të karikuar baterinë pa e hequr nga modeli.
E fiksoj shallin e Indikatorit në trupin e modeles me shirit ngjitës. Atëherë mund të riorganizoni lehtësisht
në një model tjetër.
Vendosja. Ne bëjmë vendosjen për secilën qelizë me radhë! Për të vendosur, ju nevojiten tre bateri të zakonshme 1,5 volt të lidhura në seri, një rezistencë e ndryshueshme 470 ohm dhe një multimetër dixhital. Ne ndezim rezistencën e ndryshueshme 470 Ohm me një reostat në seri me telin pozitiv të baterisë. Kështu, marrim një burim tensioni prej 4.5 V.
Ne marrim një lidhës 2-pin që është i përshtatshëm në hap dhe bashkojmë vetëm dy tela me të
nga bateria "-" dhe "+". Siç u përmend më lart, " + " kalon përmes një rezistence të ndryshueshme. Ne vendosim rezistencën e ndryshueshme në pozicionin që korrespondon me rezistencën minimale dhe lidhim lidhësin me kontaktet përkatëse të qelizës së poshtme (ose të sipërme). Meqenëse rezistenca është vendosur në pozicionin minimal të rezistencës, një tension i plotë prej 4.5 V aplikohet në qelizë dhe LED nuk duhet të ndizet. Pastaj lidhim lidhësin nga ana tjetër me dy qeliza të tjera dhe sigurohuni që të gjitha LED të jenë të fikur.
Pastaj gradualisht rrisim rezistencën e rezistencës së ndryshueshme, duke kontrolluar
Tensioni i multimetrit në daljen e rezistencës në lidhje me telin negativ. Me një rritje të rezistencës së rezistencës, voltazhi i furnizuar në qelizë do të fillojë të ulet gradualisht, dhe kur të arrijë 3.18 ... .. 3.2 volt, LED duhet të ndizet. Kur rezistenca e rezistencës zvogëlohet, d.m.th., kur voltazhi i furnizuar në qelizë rritet mbi 3.2 V, LED do të fiket përsëri. Kështu, duke riorganizuar lidhësin nga ana tjetër në kontaktet përkatëse, ne kontrollojmë të gjitha qelizat. Pragu i ndërrimit mund të ndryshohet
zgjedhja e një rezistence 4.3 kΩ. Në këtë rast, ai mund të përbëhet nga 2 rezistorë, për shembull
nëse vendosni 2 com + 2 com = 4 com (pragu i ndezjes 3,14 V) dhe 3,3 com + 1 com = 4,3 com
(pragu i ndezjes 3,18 V) Kam një rezistencë 4,3 kΩ të përbërë nga dy (3,3 kΩ + 1 kΩ), siç mund të shihet në fotografi. Dimensionet e tabelës së qarkut të printuar të Treguesit me 3 qeliza janë 30 x 30 mm.
Dioda zener e rregullueshme TL431 është një pjesë e përdorur gjerësisht dhe shitet në dyqanet e radios. Përveç kësaj, ato përdoren pothuajse në çdo furnizim me energji komutuese (përshtatës) për të kontrolluar optobashkuesin mbrojtës.
Bërë disa pjesë, ato funksionojnë mirë, ofrojnë tregues në kohë.
Prandaj, e rekomandoj për përsëritje nga modeluesit e avionëve - radio amatorët!
Forma e përgjithshme.
Diagram skematik.
Montazhi
Pamje anësore me detaje. Madhësia e tabelës 30 x 30 mm.
Pamje nga shtigjet. Madhësia e tabelës 30 x 30 mm.
LED janë çdo shkëlqim super i ndritshëm, blu. Bluja shihet më së miri në një ditë me diell.