Si ta zbuloni numrin e bartjes?
Numri mbajtës përmban të gjitha specifikimet e nevojshme teknike për pjesën. Rekomandohet që të dhënat e rëndësishme të regjistrohen menjëherë pas blerjes së një kushinetash ose mekanizmi. Nëse nuk e keni bërë një gjë të tillë, ne ofrojmë disa metoda për përcaktimin e numrit të mbajtjes.
1. Të dhënat si d, D dhe B duhet të sqarohen - ato do t'ju lejojnë të përmendni madhësinë e topit - dhe të konsultoheni me teknikë në lidhje me numrin e pjesës.
2. Ju mund të gjeni numrin në katalog - të gjitha llojet e kushinetave me numra dhe madhësi janë mbledhur atje. Zgjidhni një pjesë me të njëjtat dimensione si tuajat dhe mund të vendosni numrin e saj.
3. Ekzistojnë programe speciale që përmbajnë informacione rreth të gjitha madhësive dhe modeleve të kushinetave, për shembull, AllBearings. Si rregull, ata punojnë në një parim të përgjithshëm. Në kolonën "filter sipas madhësisë", shkruani të dhënat e disponueshme. Sa më shumë tregues të dini, aq më e madhe është saktësia e përcaktimit të numrit. Ju mund të ngushtoni kërkimin tuaj duke përdorur fushën e "përcaktimit", në të cilën duhet të futni markën e pjesës.
Kur është e nevojshme të zbuloni numrin e kushinetave që duhet të zëvendësohen, është e nevojshme të analizohen informacionet nga vendi i prodhimit.
Kjo shpjegohet me faktin se nuk ka asnjë bllok të vetëm standardesh që rregullojnë etiketimin e produkteve të tilla.
Ekzistojnë vetëm tre udhëzime ISO që janë natyra këshilluese:
- 15: 1998, duke u shtrirë në kushinetat e rrotullimit të tipit radial (përveç kushinetave të rrotulluara);
- 104: 2002, rregullon shënimin e kushinetave me rrotullimë;
- Kushineta rrotulluese 355: 1977.
Pothuajse të gjithë prodhuesit kryesorë të këtyre pajisjeve teknike (NSK, SKF, KOYO, FAG) kanë sistemet e tyre të shënimeve.
Kushineta ruse:
Për kushinetat ruse, rregullat themelore të përcaktimit të etiketave për përcaktimin e rregullave janë 3189-89.
Ku është shënuar numri
Pasi të vendosim për pronësinë e produktit, ne vazhdojmë të zbulojmë numrin.
Mund të vendoset në fund të produktit në dy versione, të shkurtra dhe të hollësishme. Në rastin e parë, është shtatë shifra (numri i dëshiruar). Në të dytën në të majtë të saj (të ndarë nga një gyp) dhe në të djathtë të saj (duke filluar me një shkronjë të madhe) janë dy blloqe informacioni shtesë.
Me rastin e përcaktimit të numrit, këto informacione mund të lihen.
Përveç pjesës së përparme të kushinetave, numri mund të specifikohet në vendet e mëposhtme:
- Në paketimin e ndërmarrjes;
- Në pasaportën për produktin;
- Në dokumentet e çertifikimit;
- Në shënimet e dërgesave;
- Në kontratën e furnizimit.
Nëse ka një vizatim konstruktiv të produktit të nevojshëm, numri duhet t'i bashkëngjitet.
Mundësia tjetër për përcaktimin e numrit është ta gjeni atë në drejtori, mund ta bëni atë në tre madhësi: të brendshme dhei jashtëm diametri si dhe gjerësia mbajtëse.
Kushinetat janë kushineta të boshteve dhe boshteve. mbjellësit përmasat kushinetë duhet të përcaktohet kur zëvendësoni një mbështetje të dështuar. Mos e çoni me vete një pjesë të shkatërruar në dyqan. Për të përcaktuar madhësinë e një topi kushinetë Ju duhet të shihni shenjat e saj. Mund të përbëhet nga 19 shifra. Sidoqoftë, për të përcaktuar madhësinë e uljes kushinetë mjaft të përcaktojë në përgjithësi përmasat .
Manuali i udhëzimeve
1. Filloni të shikoni në shënjimin me 2 shifrat e saj të drejta. Ata përcaktojnë madhësinë themelore të një topi kushinetë - diametri i vrimës së brendshme. Me një diametër të vrimës deri në 20 mm, dy numrat më të djathtë tregojnë si më poshtë përmasat : 00 - O 10 mm; 01 - O 12 mm; 02 - O 15 mm dhe 03 - O 17 mm.
2. Shumëzoni dy shifrat e djathta në përcaktimin me 5 për diametrin e vrimës nga 20 në 495 mm. Produkti që rezulton do t'ju japë një madhësi të përshtatshme kushinetë - diametri i saj i brendshëm. Pra, nëse shihni 08 në përcaktim, atëherë shumëzimi i tyre me 5, ju merrni një diametër të vrimës prej 40 mm. Numrat 20 korrespondojnë me O 100 mm, etj.
3. Kushtojini vëmendje shifrave të treta dhe të shtata në shënim. Këtu tregohet një seri kushinetash lëvizëse: shifra e tretë është diametri i jashtëm, dhe i shtati është gjerësia (lartësia). Sipas llojit të diametrit, këto janë kushineta ultralight, të lehta, veçanërisht kushineta të lehta, të mesme dhe të rënda. Në gjerësi - veçanërisht kushineta të gjera, të gjera, tipike, të afërta dhe veçanërisht të afërta. Gjerësia e tyre, ndërsa ato rriten, tregohet më tej: 7; 8; 9; 2; 3; 4; 5; 6. Vlerat tipike të gjerësisë 0 dhe 1 nuk tregohen. Komuniteti i vlerave të vërteta, i treguar me numrat e të parit, të dytit, të tretin dhe të shtatën, tregon përgjithësinë përmasat top kushinetë Rolling.
4. Shikoni shifrën e katërt në të djathtë, duke treguar llojin kushinetë : 0 - top radial i vetëm me radhë; 1 - top me rreze sferike me dy rreshta, 2 - radiale me rollers të shkurtër cilindrikë; 3 - rrotullues radial me sferë të dyfishtë; 4 - rul me hala ose me rollers të gjatë; 5 - rrotullues me rollers të përdredhur; 6 - kontakt këndor me top; 7 - rul konik ; 8 - top i vazhdueshëm; 9 - rrotullues i vazhdueshëm. Shifrat e pesta dhe të gjashta në shenjë tregojnë modelin kushinetë .
5. Nëse parametrat e mësipërm ndryshojnë nga standardi, merrni parasysh pjesën shtesë të shënimit. Në pjesën shtesë të majtë tregohet klasa e saktësisë kushinetë . Ndërsa përmirësohen, klasat e saktësisë shënohen si më poshtë: 8; 7; 0; 6X; 6; 5; 4; T; 2. Një klasë e pranueshme e saktësisë fillon nga zero, klasat 8 dhe 7 janë në të vërtetë mbeturina prodhimi. Mesatarja e artë në raportin çmim / cilësi lejohet të merret me klasën e 6-të të saktësisë.
Marrja e matjeve në çdo fushë të teknologjisë përfshin përdorimin e mjeteve dhe pajisjeve speciale. Ata ndryshojnë mes vete në metodën e përdorimit, saktësinë e matjeve dhe fushën në të cilën mund të përdoren. Një vend i veçantë në matje është përcaktimi diametra vrima.
Ju do të duhet
- - sundimtari matës;
- - caliper i zakonshëm;
- - caliper mikrometrik;
- - caliper vernier.
Manuali i udhëzimeve
1. Në rastin më të thjeshtë, kur saktësia e madhe e matjes nuk është e rëndësishme, përdorni për të përcaktuar diametrin hapje sundimtar matës. Bashkangjit mjetin në vrimën në shkallën e diametrit të tij dhe numëroni numrin e ndarjeve (centimetra dhe milimetra) që futen në vrimë në këtë rresht. Për shumicën e matjeve shtëpiake, saktësia që ofron kjo metodë është absolutisht e mjaftueshme.
2. Përdorni një kalibër për të matur vrimat e pasakta. Vendosni pajisjen në vrimën matëse me dorën e djathtë. Me gishtin tregues të dorës tjetër, shtypni grykën e harkut të calipit kundër murit hapje . Tani shkundni pajisjen pak në mënyrë që të gjeni zgjidhjen minimale të harqeve, në të cilën harku i dytë do të prekë murin hapje .
3. Pasi të jetë instaluar solucioni i kaliferit, përcaktoni vlerën e tij nga sunduesi matës. Në këtë rast, fundi i sundimtarit duhet të abutohet në disa sipërfaqe të përpunuara (në murin e pjesës së kalipit dhe kështu me radhë). Saktësia e matjes së diametrit në këtë rast do të jetë e ulët (brenda 0.2-0.5 mm).
4. Një matje më e saktë e diametrit të vrimave, madhësia e të cilave tejkalon 10 mm, bëhet me një caliper. Për këtë qëllim, përgatiten sipërfaqe anësore të rrumbullakosura të nofullave të sipërme të saj. Vendosni mjetin në vrimë dhe rrëshqisni nofullat e caliperit në mënyrë që ata të mbështeten në skajet hapje . Në shkallën e pajisjes, përcaktoni diametrin hapje në të dhjetën më të afërt të një milimetri. Kjo metodë është e përshtatshme për të matur diametrin e vetëm asaj pjese hapje , e cila ndodhet afër fundit të pjesës, por kontrolloni cilindricitetin (mungesa e konit) nuk funksionon.
5. Matjet e sakta të diametrit të vrimave mund të kryhen edhe me një kalibër të veçantë (mikrometrik). Shtë e pajisur me shufra shtesë me gjatësi të ndryshme, të bashkangjitura në kërcellin e pajisjes, e cila ju lejon të rritni kufijtë e matjes. Gjatë matjeve, sigurohuni që caliper të pozicionohet rreptësisht pingul me boshtin hapje diametri i të cilit përcaktohet. Për ta bërë këtë, shtypni një fund të pajisjes në sipërfaqe hapje , dhe lëvizja e dytë në rrafshin diametral.
Video të lidhura
Vështirë për të zgjedhur llojin ose llojin e duhur të mbajtjes?
A nuk doni të humbni kohë duke kërkuar në një katalog të gjerë të mijëra artikujve?
Dëshironi të merrni shpejt të gjitha informacionet e nevojshme në një vend?
Kompania "PromBering" u përpoq të bënte zgjedhjen sa më të thjeshtë dhe të përshtatshme. Për ta bërë këtë, ne sugjerojmë të përdorni formularin e zgjedhjes së kushinetave në internet. Thjesht shkruani karakteristikat në fushat e duhura dhe merrni një rezultat të shpejtë.
A e dini numrin e kushinetave që ju nevojiten?
Zgjedhja do të jetë edhe më e lehtë. Shtë e mjaftueshme për të futur shënimin në fushën e duhur për zgjedhjen e kushinetave me numër për të marrë të dhëna për disponueshmërinë dhe çmimet.
Zgjedhja e duhur e kushinetave
Zgjedhja e saktë e kushinetave në madhësi ndikon drejtpërdrejt në besueshmërinë e pajisjeve. Por për të siguruar funksionimin e gjatë të pa mirëmbajtjes së mekanizmave, është e rëndësishme të merren parasysh parametra të tjerë:
- Madhësia, drejtimi, natyra e ngarkesës. Lloje të ndryshme të kushinetave mund të thithin ngarkesa radiale, boshtore ose të përziera.
- Numri i revolucioneve të të dy unazave për njësi të kohës.
- Burimi i punës, i shprehur në orarin e punës ose numri i revolucioneve për tërë jetën e shërbimit. Ky është një nga parametrat më të rëndësishëm që karakterizon qëndrueshmërinë e përdorimit të mekanizmit.
- Karakteristikat e mjedisit në të cilin kushineta do të operohet.
Ndonjëherë ka situata në të cilat është urgjente të zbuloni numrin e bartjes. Por si ta bëni këtë, nëse kushineta po funksionon, nuk është shumë e përshtatshme ta hiqni atë nga pajisja. Në këtë rast, ekzistojnë 3 mënyra për t'ju ndihmuar të gjeni përgjigjen në pyetjen se si të përcaktoni numrin e bartjes.
Gjeni numrin e bartjes
Përcaktoni madhësinë e topit. Për ta bërë këtë, zbuloni karakteristikat e tilla të kushinetave si d, D dhe B \u003d 5. Sapo të përcaktoni këto të dhëna, kontaktoni specialistë për të ndihmuar në gjetjen e numrit të mbajtjes.
Ekzistojnë GOST të caktuara në të cilat përshkruhen të gjitha llojet dhe llojet e kushinetave me numra dhe madhësi. Hapni GOST, gjeni një kushinetë me të njëjtat dimensione si tuajat dhe shikoni se cili numër i mbajnë korrespondon me dimensionet që janë tipike për mbajtjen tuaj.
Përdorni programin, i cili përmban të dhëna për të gjitha kushinetat. Për shembull, udhëzuesi mbajtës i AllBearings. Ky program përmban më shumë se 47,000 hyrje, kështu që gjetja e mbajtjes së duhur për ju nuk është e vështirë.
Vendosni dimensionet e kushinetave që dini në fushën "Filtri sipas madhësisë". Nuk është e nevojshme të plotësoni të gjitha fushat, megjithatë, sa më shumë karakteristika të keni mbushur, aq më shpejt mund të gjeni kushinetat dhe të zbuloni numrin tuaj. Në rast se nuk njihni dimensionet e kushinetave, kërkoni kontrollin e markës. Në fushën 2 - "përcaktimi" - shkruani markën mbajtëse dhe prisni derisa programi të zgjedh kushinetat e kësaj marke.
Ky program përmban modalitetin "rreptësisht" - është një modalitet i rreptë kërkimi. Përdoreni nëse jeni të sigurt për drejtshkrimin e saktë të markës së mbajtjes. Kjo mënyrë do të rendisë të gjitha kushinetat me emër dhe do t'ju ofrojë saktësisht markën që keni hyrë kur kërkoni.
Këshilla të dobishme për përcaktimin e numrit të mbajtjes:
Farëdo metode që përdorni, merrni si rregull kur blini ndonjë pajisje ose thjesht duke regjistruar menjëherë numrin e saj. Kështu që do të jeni të sigurt që në rast nevoje do të merrni saktësisht modelin e mbajtjes që ju nevojitet. Ose merrni me vete një kushinetë të vjetër për të blerë saktësisht të njëjtën nëse nuk dini si ta përcaktoni numrin e kushinetës.
Shqyrtimi Hyundai Sonata 6 dhe çmimi i makinës
Shqyrtim Suzuki Grand Vitara, video test dhe sallon fotografish
Shumë nga mekanizmat aktualisht ekzistojnë kanë kushineta që i lejojnë ato të rrotullohen. Prandaj, asnjë lëvizje rrotulluese nuk mund të kryhet pa to. Por edhe një pjesë kaq e dukshme e pazëvendësueshme, por në të njëjtën kohë e padukshme e mekanizmit mund të jetë e ndryshme në madhësi dhe në karakteristikat e tij teknike, veçanërisht merret parasysh diametri, dimensionet e të cilit zakonisht paraqiten në tabelë. Por, pavarësisht se çfarë mund të jetë kjo pjesë, pavarësisht se si duket apo cilido qoftë karakteristikat e tij teknike, ajo duhet të përmbushë vetëm një detyrë - të sigurojë pjesët me rotacion ose rotacionin e nevojshëm.
Rregulla për të punuar me kushineta
Kushineta duhet të jetë e besueshme, por nganjëherë kushtet në të cilat duhet të sigurojë rotacion nuk korrespondojnë me funksionimin e saj normal. Shtë gjithashtu e saktë dhe kushtet mund të ndikojnë në faktin se mbajtja, edhe në kushte të mira, papritmas mund të dështojë.
prandaj ekzistojnë rregulla speciale të funksionimit kjo pjesë, dhe ato duhet të merren shumë seriozisht në mënyrë që pjesa juaj të mund të funksionojë sa më gjatë. Për shembull, nuk duhet ta mbingarkoni atë dhe të siguroheni që funksionon vetëm në periudhën e caktuar kohore, dhe jo më shumë. Një rregull tjetër duhet të konsiderohet se ai duhet të zgjidhet në mënyrë që të përshtatet në mënyrë të përsosur në madhësi, diametër dhe karakteristikat e tjera teknike.
Për shembull, për nga madhësia mund të gjeni një shumëllojshmëri të kushinetave: nga miniatura deri në madhësitë më gjigande. Ekziston një ndarje tjetër: shpejtësia e lartë, shpejtësia e ulët, më e sakta dhe të tjerët. Të gjitha këto ndarje varen nga ku dhe si do të përdorni këtë element të rëndësishëm të lëvizjes rrotulluese.
Dizajni i mbajtjes
Vazhdimi i bisedës për kushinetat, nuk mund të mungoni në hartimin e tij. Por, në vetë elementin, i cili siguron rotacion, ka shumë detaje nga të cilat përbëhet. Dhe secila prej tyre duhet të merret shumë seriozisht, sepse njëri prej tyre duhet të dështojë dhe funksionimi i mëtutjeshëm i kushinetave bëhet thjesht i pamundur.
Aksesorë mbajtës:
- Trupat rrotullues.
- Mëngë.
- Nuts.
- Washers.
- Unaze.
- Vida.
- Staples.
- Balls.
Sigurisht, kjo listë e pjesëve që mbajnë mund të renditen më tej, por prapë ia vlen të gjitha studioni në praktikë dhe kuptoni secilin element veç e veçpër ta bërë më të lehtë për tu gjetur më vonë.
Llojet e kushinetave
Ekzistojnë disa ndarje të kushinetave në lloje të ndryshme. Në zemër të çdo ndarje të tillë është një shenjë, e cila është kryesore për klasifikimin e një elementi të rëndësishëm për rrotullimin në një ose një lloj tjetër.
Ndarja e parë e tillë bazohet në mënyrën se si ngarkesa vepron në kushineta dhe e bën atë të funksionojë. Por ngarkesa mund të jetë e ndryshme. Në përputhje me rrethanat, grupet mbajtëse do të përfshihen në varësi të mënyrës se si ngarkesa vepron mbi të.
Grupet në varësi të veprimit të ngarkesës:
- Radial.
- Fut.
- Kontakt këndor.
Le të shqyrtojmë në detaje secilën nga këto grupe. Pra, grupi i parë është radial. Kushineta të tilla mund të veprojnë vetëm nën ndikimin e ngarkesës radiale. Rrallë veprojnë nën ngarkesën boshtore nëse elementët e rrotullimit përdoren për rrotullim, të cilat kanë diametrin e kërkuar.
Grupi i dytë - elementë të vazhdueshëm për rotacionin. Ata punojnë në mënyrë të përkryer vetëm kur ndiejnë efektet e ngarkesave boshtore. Grupi i tretë është kontakti këndor, i cili mund të veprojë nën çdo lloj ngarkese. Ata nuk kanë frikë nga ngarkesat radiale ose të vazhdueshme.
Ekziston një ndarje tjetër e kushinetave, e cila bazohet në formën e trupave të mbështjelljes, si dhe në diametrin e tyre. Ekzistojnë dy lloje: topi dhe rul. Lloji i parë është topi. Ato bazohen në petëzimin e një trupi të tillë, i cili në formën e tij i ngjan topave dhe ka një diametër të vogël. Lloji i dytë - rrotull, bazohet në një formë të ndryshme petëzimi, domethënë, rollers me një diametër të caktuar.
Sipas modelit të tyre, kushinetat mund të ndahen në dy lloje: vetë-harmonizuese dhe jo-harmonizuese. Elementë të tillë për rotacionin quhen gjithashtu sferikë. Zakonisht, ndarja në këto dy specie nuk kërkon ndonjë shpjegim të mëtejshëm, por gjëja kryesore është të mos harrojmë për diametrin dhe sa më shpesh të jetë e mundur për të parë në tabela të veçanta, ku ato paraqiten me shpjegime.
Ekziston një ndarje tjetër e kushinetave, e cila varet jo vetëm nga diametri ose madhësia e saj, por kryesisht nga rrotullimi i trupave të vetë kushinetës, i cili mund të jetë ose rul ose top. Një element i tillë për rrotullim mund të jetë, pavarësisht nga forma e topave ose rrotulluesve, një-, dy-, tre- ose katër-ngarkuar.
Aftësia e zbatueshmërisë
Duke ditur diametrin e kushinetave, modelin dhe dimensionet e tij, si dhe formën e rrotullimit: topa ose rollers, do të jetë e mundur të përcaktohet se sa i rëndësishëm do të jetë ky element për përdoruesin të rrotullohet. Kjo është veçanërisht e rëndësishme për ata që janë të përfshirë në çdo lloj riparimi të pajisjeve. Për shembull, automobilat, traktorët ose automjetet motorike. Por ekziston një tjetër zbatueshmëri e kushinetave, që është të njohim madhësinë e saj.
Vlen të tregohet më hollësisht se si tregohen kushinetat në tabela. Zakonisht në secilin element për rrotullim diçka shkruhet me shkronja dhe numra. i tillë legjendë dhe diametër përfshirë. Se sa saktë është bërë pjesa tregohet me shkronjën përpara numrit.
Numrat tregojnë madhësinë e vrimës, çfarë është e veçantë në hartimin e saj, për shembull, topat ose format e rrotave të trupave. Zakonisht dy shifrat e para në pjesën që rrotullohen tregojnë diametrin. Por madje diametri mund të jetë i ndryshëm, kështu që ju duhet të jeni shumë të vëmendshëm ndaj numrave.
Pra, detajet e rrëshqitjes që janë të nevojshme për një ndërtesë automobilistike nuk zbatohen shumë rreptësisht në diametër dhe në përdorimin e topave ose rollers. Një gjë tjetër është pjesa për kodrina, ku gjithçka duhet të jetë në mënyrë rigoroze udhëzime.
Për shembull pjesa e rrëshqitjes së topave përdoret gjerësisht për prodhimin e pjesëve të makinave. Për të ngarkuar në këtë rast ishte më e madhe, është e nevojshme të përdorni saktë topat. Vlen të kujtohet se hendeku duhet të jetë më i madh se topi. Nga rruga, pjesët e topit lejojnë përdorimin e tyre në kënde të ndryshme.
Por pastaj pjesët e rulit ofrojnë shpejtësi të lartël, e cila është e nevojshme shumë shpesh. Mos i përzieni të gjitha llojet e kushinetave, përndryshe atëherë gjatë funksionimit topat do të ndërhyjnë në funksionimin e rrotullave dhe anasjelltas. Prandaj, ia vlen të monitoroni formën e rrotullimit, nëse është një top, atëherë një pjesë e tillë e topit duhet të përdoret për qëllimin e saj të synuar. Aktualisht, pjesët e topit për rrotullim përdoren shumë më shpesh se të gjithë të tjerët.