Pentru o lungă perioadă de timp, sticla blindată a devenit o parte integrantă a protecției caselor, vitrinelor și mașinilor împotriva intrușilor sau a atacurilor armate. Acest element structural este adesea denumit armură transparentă. Ochelarii blindați sunt folosiți pe scară largă în viața unei persoane obișnuite și în structurile de aplicare a legii și de securitate. Importanța lor în lumea modernă nu poate fi subestimată.
Construcție ferestre blindate
Sticla blindată este un produs translucid care protejează oamenii și bunurile materiale, obiectele de valoare de furt, înfrângere, deteriorare și, de asemenea, protejează împotriva pătrunderii în cameră din exterior prin deschiderea ferestrei. Aceste produse includ două elemente:
- Sticlă blindată. Este format din mai multe straturi de sticlă transparentă, care sunt lipite împreună cu un material polimeric care se întărește la soare. Cu cât produsul este mai gros, cu atât este mai mare nivelul de protecție.
- Cadru. Este realizat din profile de aluminiu sau otel, foarte rar din lemn. Pentru a conferi sistemului proprietăți de protecție, acesta este întărit cu plăci de oțel întărite la căldură. Astfel de suprapuneri trebuie să se suprapună în mod fiabil îmbinării dintre cadru și sticlă.
Masa structurilor blindate finite poate fi mai mare de 350 kg pe metru pătrat. Aceasta este de zece ori mai mare decât greutatea unei unități de sticlă convenționale. Pentru a compensa masa, acestea sunt echipate cu acționări electrice.
Tipuri de sticlă blindată
Sticla blindată este clasificată în funcție de capacitatea sa de a rezista unui anumit tip de impact distructiv.
Conform acestui criteriu, toate structurile pot fi clasificate în mai multe grupuri:
- Ferestre antivandal.
- Produse rezistente la rupere.
- Constructii anti-arme de foc.
Structurile de protecție auto sunt plasate într-un grup separat, deoarece le sunt impuse cerințe speciale. ochelarii blindați și cerințele pentru fabricarea lor sunt determinate de GOST 51136-97 și GOST 51136-2008. Fiecare tip de protecție transparentă este setat pentru protecție într-un mediu specific.
Sticlă antivandalică
Ferestrele rezistente la vandal protejează oamenii de schije atunci când intrușii încearcă să-l spargă. Ele reprezintă o unitate de sticlă multistrat cu o cameră de aer, unde una specială este lipită de sticlă. Filmele, la rândul lor, sunt făcute din plastic gros. Fragmentele se „lipesc” de el, astfel încât să nu zboare în direcții diferite.
Astfel de structuri sunt folosite cel mai adesea în unitățile comerciale și în sectorul privat pentru a proteja atât ferestrele și ușile, cât și vitrinele. Potrivit GOST, ele sunt împărțite în trei clase - de la A1 la A3, fiecare dintre acestea se distinge prin rezistența la impactul unei anumite forțe.
Sticla rezistenta la efractie
Sticla blindata anti-efractie se deosebeste de varianta anti-vandal doar prin rezistenta la efectele distructive. Un astfel de produs oferă protecție împotriva loviturilor repetate cu un baros sau un ciocan și este capabil să reziste la lovirea unei mașini. Cel mai adesea, astfel de modele sunt folosite pentru a proteja instituțiile bancare, magazinele, unitățile cu o cifră de afaceri mare de fonduri, precum și rafturile pentru depozitarea drogurilor narcotice.
Conform standardelor interne, în funcție de câte șocuri poate rezista sticla antiefracție, i se atribuie o clasă de protecție de la B1 la B3. Cu cât structura poate rezista la mai multe lovituri cu un obiect contondent sau ascuțit, cu atât clasa este mai mare.
Sticla antiglont
Sticla antiglonț oferă protecție împotriva pătrunderii gloanțelor sau a fragmentelor acestora. Sunt structuri multistrat armate, fixate cu un material polimer special. Structuri similare sunt instalate la unități unde riscul unui atac armat este mare: în departamentele Ministerului Afacerilor Interne, la punctele de securitate, puncte de control și în alte locuri similare.
Ochelarii antiglonț sunt împărțiți în clase de protecție de la B1 la B6a. Testele structurale sunt efectuate cu diferite tipuri de arme de foc - de la un pistol Makarov și o pușcă de asalt Kalashnikov până la o pușcă de lunetist Dragunov. În timpul încercărilor se folosesc gloanțe de diferite greutăți și cu miez de oțel, întărit termic sau special.
Sticla blindata pentru masina
Mașina este echipată cu spate lateral ranforsat și parbrize. Principala lor caracteristică distinctivă este durata lor de viață. Dacă o fereastră blindată standard poate dura câteva decenii, atunci produsele pentru o mașină nu servesc mai mult de 5-6 ani. Acest lucru se datorează naturii sarcinilor la care este supusă sticla zilnic.
Astfel de elemente blindate translucide sunt o unitate de sticlă multistrat, care este întărită suplimentar cu o peliculă rezistentă la șocuri. Unele dintre ele, pe lângă protecția împotriva resturilor zburătoare, protejează împotriva radiațiilor ultraviolete. Adesea, parbrizele sunt acoperite cu o peliculă mai groasă decât geamurile laterale și din spate.
AscundeFerestrele blindate sunt utilizate pe scară largă în diverse domenii: pot fi găsite în bănci, case, magazine, mașini. Construcția este o sticlă groasă din triplex și policarbonat. Straturile sunt stivuite una peste alta si lipite intre ele intr-un mod special, rezultand o structura groasa, grea, dar foarte rezistenta.
Soiuri de produse
Sticla blindată este similară ca proprietăți cu sticla călită. Citiți care este avantajul acestui tip de sticlă.
Folosind o fereastră blindată
Nu cu mult timp în urmă, ferestrele blindate erau folosite exclusiv în locuri asociate cu valori materiale sau istorice, cum ar fi muzeele și băncile, dar mai târziu ferestrele blindate au devenit mai accesibile și a devenit posibil să le găsești în case private obișnuite și nu neapărat reprezentanți ai autoritatile statului.
Ferestrele moderne au devenit mult mai avansate din punct de vedere tehnologic, mai accesibile și mai funcționale. Ele pot fi instalate în loc de. Ferestrele blindate pentru o casă depășesc o unitate standard de sticlă nu numai ca rezistență, ci și în toate celelalte indicatori, cum ar fi protecția împotriva frigului și a zgomotului.
Ferestre blindate
Ce trebuie să țineți cont atunci când cumpărați o fereastră blindată?
Înainte de a cumpăra ferestre blindate pentru un apartament, trebuie să determinați pentru ce aveți nevoie. Este posibil să nu vă puteți descurca cu cea mai ieftină opțiune care poate rezista la o lovitură de piatră sau este posibil să nu fiți nevoit să plătiți în exces, deoarece nu aveți nevoie de o fereastră antiglonț.
Funcțiile produsului pot fi după cum urmează:
- Protecție împotriva pietrei, deteriorări mecanice accidentale.
- Protecție împotriva atacurilor criminale, încercări de a sparge geamul intenționat.
- Protecție împotriva împușcăturilor de la arme de foc.
Diferența dintre modele constă nu numai în rezistență și cost, ci și în funcționalitate.
Opțiuni posibile atunci când alegeți o fereastră
Rezervarea ferestrelor cu geam dublu cu o peliculă le face mai durabile, sticla triplex nu cade atunci când este spartă, deoarece toate fragmentele rămân pe film. Cu o dorință puternică, acest lucru poate fi rupt, dar un vandal va dura destul de mult timp. Adolescenții huligani nu trebuie să se teamă. Sticla poate împiedica un hoț să intre în casă, va rezista mult mai mult decât de obicei, dar nu va oferi protecție împotriva unui glonț.
Ferestrele din plastic blindate pentru o casă sunt cel mai adesea un triplex obișnuit, care fixează mai multe pahare subțiri. Face fereastra mai puternică și mai sigură, dar un astfel de produs nu poate fi numit pe deplin armură. O fereastră cu geam dublu dintr-un astfel de plan este potrivită pentru ramele standard din plastic și este ieftină.
Tipuri și modele de rame
O unitate de sticlă antiglonț este o plăcere destul de costisitoare, dar poate fi de diferite opțiuni, de la o sticlă relativ subțire la un complex gros. Este de remarcat faptul că ferestrele cu geam dublu de clasa cea mai joasă pot îngheța și pot da condens. Ferestrele cu geam dublu mai groase vor face față unei lovituri de la o armă mai puternică și vor păstra mai bine căldura, dar vor cântări destul de mult. Cu cât clasa unității de sticlă este mai mare, cu atât este mai puternică. Pentru a fi clar, un produs de clasa 5 poate rezista la o lovitură de la un calibru 7,62.
Ferestrele blindate pentru casă pot avea diferite modele și îndeplinesc cerințe și standarde diferite, ceea ce afectează grosimea și prețul acestora. Astfel de ferestre sunt destul de accesibile pentru o gamă largă de cumpărători.
Sticla blindată este o structură translucidă cu mai multe straturi, constând din mai multe straturi dintr-o compoziție polimerică și mai multe pahare, ale căror straturi sunt lipite împreună cu folii polimerice sau umplute cu un polimer special. Filmele polimerice sunt straturi continue, în care grosimea este în intervalul de la 0,2 la 0,3 milimetri.
Designul, în funcție de clasa de protecție cerută, poate fi cu sau fără peliculă. Datorită structurii structurii, astfel de ferestre blindate cu geam dublu și ferestre blindate oferă protecție împotriva interferențelor fizice și chiar împotriva gloanțelor de diferite tipuri de arme, în funcție de tipul de protecție necesar (interval de la 10 la 80 de milimetri sau mai mult). .
În fabricarea sticlei blindate, diferite combinații de componente după tip și clasa de protecție oferă o diferență în proprietățile sale. Pe lângă gradul de complexitate al producției, numărul de straturi de sticlă blindată este diferit.
Ferestrele cu geam dublu blindat pot fi decorate în conformitate cu sarcina de proiectare a încăperii în care este instalată. Sticla blindată poate fi colorată, decorată cu gravură cu diamant sau gravare chimică. Într-un „sandwich” din sticlă blindată, unul dintre pahare are o suprafață de oglindă, caz în care această sticlă moștenește caracteristici reflectorizante. Datorită sticlei blindate, a devenit posibilă crearea unor structuri de închidere deosebit de puternice, care pot rezista chiar și la impactul armelor de foc și fără a sacrifica în niciun caz estetica.
Film de armare
Pe langa rezervarea sticlei, exista si metode mai „simple”, si anume folie de armare a sticlei. Sticla cu peliculă aplicată are o rezistență foarte mare, este greu să o spargi sau să o străpungi cu o piatră, o sticlă aruncată, sau obiecte străpungătoare. Rezistența mare a filmului (filmul practic nu se deformează în direcția perpendiculară pe suprafața sa) nu permite deformarea sticlei. Prin urmare, sticla devine mult mai durabilă, deoarece deformarea transversală a sticlei este necesară pentru formarea de fisuri și fragmente, care este împiedicată de filmul de armare.
Filmul de armare protejează doar sticla. Sticla armată cu o peliculă este greu de spart sau spart, ceea ce oferă protecție împotriva pătrunderii prin fereastră, similar grătarelor. Chiar dacă geamul este spart, pelicula de armare protejează împotriva deteriorării de către așchii: sticla crăpată, așchii, așchii rămân rigid lipite de folie, care are o rezistență ridicată. Sticla cu o peliculă de armare va cădea pur și simplu doar în întregime (ca o foaie de placaj).
Majoritatea cititorilor vor trage imediat „paralele” la „triplex” și de fapt vor avea dreptate, în ambele cazuri se folosește un film, singura diferență este metoda de aplicare a acestui film. Care este diferența dintre efectul ambelor tipuri de sticlă.
Cu toate acestea, o astfel de sticlă poate fi doborâtă cu un baros (va cădea în întregime în cameră), străpunsă cu un topor sau tăiată cu o râșniță, decupând orificiul necesar pătrunderii, asemănător zăbrelei.
Aplicație
Filmul de armare este adesea folosit pentru cabane de țară, geamuri ale balcoanelor și ferestrelor etajelor inferioare ale apartamentelor, vitrine externe și interne ale magazinelor și buticurilor, zonele de 24 de ore ale băncilor, structurile de fațadă mari, mașini.
Ferestrele blindate sunt adesea instalate în conace private, birouri și apartamente, la posturile de securitate ale băncilor și întreprinderilor, în instituții cu responsabilitate înaltă, facilități militare și vehicule cu numerar în tranzit.
Filmul de armare este lipit de sticla in mai multe straturi (in functie de nivelul de protectie). Se poate instala si concomitent cu o oglinda, folie colorata, mata.
rama ferestrei cu folie de protectie poate fi realizata din orice material. Ferestrele din sticlă pot avea forme foarte mari sau aproape arbitrare, cu geamuri cu geam dublu cu mai multe camere (două, trei camere), ceea ce vă permite să obțineți proprietăți excelente de izolare termică și fonică. Filmul de armare poate fi aplicat pe sticla existenta.
Sticla antiglont- o structură multistrat formată din mai multe ochelari M1 și mai multe straturi dintr-o compoziție polimerică fotocurabilă. În funcție de clasa de protecție necesară, designul poate fi fie cu film, fie fără. Această structură oferă protecție împotriva gloanțelor trase din diferite tipuri de arme, în funcție de clasa de protecție necesară.
Designul sticlei antiglonț este transparent și oferă protecție în clasele B1, B2, B3, B4, B5 (clasa de rezistență la glonț 1, 2, 3, 4 și 5) în conformitate cu GOST R 51136-2008, transmitend simultan lumina. Potrivit pentru geamuri interioare și exterioare.
Este posibilă finalizarea unei ferestre cu geam termopan pentru a menține regimul de temperatură.
Sticla antiglont- o garanție de securitate, a fost creat cu scopul de a proteja oamenii și bunurile acestora. De aceea este deosebit de important ca sticla să fie de o calitate excelentă. Trebuie să vă asigurați că dumneavoastră și proprietatea dumneavoastră sunteți pe deplin protejați. Prima, a doua, a treia, a patra, a cincea sau a șasea clasă de protecție a sticlei antiglonț este aleasă în funcție de condițiile și dorințele clientului.
Domeniul de utilizare a sticlei antiglonț
- case de schimb valutar;
- locuri pentru emiterea de bani la casele de marcat ale marilor organizații, întreprinderi;
- posturi de paza interioara in banci, magazine de bijuterii, galerii de tir;
- locurile de muncă ale operatorilor de benzinării;
- locurile de muncă ale casierelor băncilor care lucrează în sălile de operație;
- locurile de muncă ale angajaților unităților de serviciu ale organelor de afaceri interne;
- echipamente pentru bănci și automate de colectare a numerarului;
- alte clădiri, structuri și obiecte care trebuie protejate de efracții, lovituri și bombardamente.
Ferestrele cu geam dublu din sticlă blindată laminată, realizate cu oglindă, nuanțate de diferite culori, au proprietăți unice care oferă nu numai protecție a încăperii împotriva impactului și decojirea, ci și reduc pierderile de căldură în sezonul rece, protejează de nocive. efectele luminii solare și ale zgomotului.
O oglindă din sticlă laminată, împreună cu caracteristici de rezistență și proprietăți estetice ridicate, asigură utilizarea ei pe termen lung și în siguranță în încăperi cu umiditate ridicată (în băi și piscine).
Sticla de protectie laminata blindata (sticla antiglont) este destinata utilizarii in vehicule, in cladiri administrative si rezidentiale, unde este nevoie de protejarea vietii umane si a valorilor materiale.
Caracteristicile sticlei antiglonț
Specificații sticla antiglont respectă GOST R 51136-2008 „Ochelari de protecție multistrat”. Transmisia totală a luminii a sticlei este de cel puțin 70%. Sticla trebuie să fie rezistentă la căldură și umezeală, să reziste la o temperatură de 60 ° C și o umiditate de 95%. Rezistența sa la îngheț este de minus 40 ° С.
Abilitatea defensivă sticla antiglont depinde de grosimea lui. Sticla are 37 mm grosime și oprește gloanțele PS-43 de 7,62 mm de la AKM. Conform certificatului emis de Standardul de Stat al Rusiei, o astfel de sticlă corespunde clasei a treia de protecție și, în plus, este capabilă să rețină gloanțe de la pistoale PM, TT, pușcă de asalt AK-74 și fragmente din grenadele de mână RGD-5 , F-1 și RG-42.
Sticla antiglonț are proprietăți de protecție
- rezistă la multiple impacturi ale unui corp în cădere liberă;
- rezistent la penetrare;
- rezistă la impactul armelor de foc (pistoale PM, TT, mitraliera AKM, pușcă SVD) și previne prin pătrunderea elementului deteriorator.
Tehnologii de producere a sticlei blindate
Pentru fabricarea sticlei antiglonț, se folosesc piese de prelucrat lustruite plate sau îndoite cu o grosime de 5 până la 10 mm. Pentru a le crește rezistența, acestea sunt lipite împreună într-o anumită combinație. Filmul de polivinil butiral este folosit ca material de lipire. Apoi un strat este lipit de suprafața interioară a sticlei, care protejează împotriva deteriorării cauzate de fragmentele secundare de sticlă. Astfel, obțineți nu numai sticlă extrem de durabilă, ci și sticlă rezistentă la spargere.
Folie de protectie din sticla blindata
Filmul de protecție are o rezistență la tracțiune transversală foarte mare. Când este aplicat pe sticlă, îi conferă aceleași proprietăți: slăbește foarte mult deformațiile transversale pe suprafața sticlei, inclusiv microvibrațiile. Când apare chiar și o mică deformare laterală, pelicula polimerică vâscoasă readuce rapid sticla (oferind deformații elastice) în poziția sa normală. Desigur, un impact suficient de puternic poate devia sticla cu pelicula din poziția sa neformată la distanța necesară pentru spargerea sticlei fragile. Dar, în același timp, rămâne pe loc, lipit de folia de protecție.
Proprietățile unei folii de protecție din sticlă antiglonț
- întărirea sticlei - dacă impactul nu este prea puternic, sticla nu se sparge (când este lovită de un corp moale, picior, piatră sau sticlă);
- rezistent la spargere - folia împiedică intrarea fragmentelor în cameră chiar și atunci când sticla se sparge (prin urmare, folia de protecție este aplicată pe ferestrele blindate din partea din spate);
- protecție împotriva pătrunderii - menținerea integrității ferestrei (chiar și după spargere) împiedică intrarea intrusului în încăpere, oferind o protecție asemănătoare cu grilajele;
- posibilitatea de a asculta prin eliminarea vibrațiilor sonore din sticlă cu echipamente speciale este aproape complet exclusă;
- proprietăți de izolare fonică (sunetul intră în cameră prin fereastră din cauza vibrațiilor mecanice ale sticlei, care repetă zgomotul străzii);
- absoarbe bine lumina ultravioletă, împiedicând decolorarea interiorului și oferind protecție împotriva unuia dintre tipurile de transfer de căldură. Ca urmare, izolarea termică a încăperii de mediul exterior crește și, ca urmare, costurile de încălzire a încăperii iarna și de răcire vara sunt reduse;
- cu calități de protecție similare, sticla cu folie de protecție poate fi scoasă din interiorul încăperii.
Cerințe pentru instalarea geamurilor antiglonț
Panourile de protecție trebuie să aibă o clasă de rezistență nu mai mică decât clasa de rezistență a geamului de protecție aplicat. Pentru clasa B1 (P1) panourile trebuie să fie din tablă de oțel cu o grosime de cel puțin 6 mm. Pentru clasa B3 (P3) - din foi de aliaj blindate cu o grosime de cel puțin 4,5 ... 7 mm.
Tăvile pentru transferul de bani sau documente, deschiderile pentru negocieri trebuie să aibă un design care să excludă pătrunderea unui glonț în zona protejată atunci când este tras din exterior.
Suporturile verticale trebuie să fie fixate în siguranță de tavan și podea. Elementele structurale orizontale trebuie să fie bine ancorate la fiecare îmbinare și, dacă este posibil, ancorate de pereți.
Ușile către zona protejată trebuie să ofere același nivel de protecție ca și geamurile antiglonț utilizate. În plus, acestea trebuie să se deschidă spre exterior și să fie prevăzute cu un încuietor cu autoblocare.
Orice fereastră din zona protejată trebuie protejată cu geamuri antiglonț de aceeași clasă cu cea instalată în interiorul clădirii.
Metode de testare pentru sticla rezistentă la glonț
Esența acestei metode este de a determina rezistența sticlei laminate la efectele anumitor tipuri de arme de foc. Testele sunt efectuate pe trei mostre de sticlă laminată cu dimensiuni de 500 × 500 mm. Desenați un triunghi echilateral în centrul piesei de testare cu o lungime laterală de 120 mm. Trei focuri sunt trase în vârfurile acestui triunghi. Se consideră că sticla a trecut testul în absența pătrunderii.
Cerințe pentru testarea sticlei antiglonț
- piesa de încercare este instalată într-un cadru rigid cu fixare;
- cadrul rigid nu trebuie să se miște sub impactul gloanțelor;
- piesa de încercare trebuie instalată perpendicular pe direcția de mișcare a glonțului;
- toate cele patru margini ale sticlei trebuie prinse uniform, lățimea de prindere trebuie să fie (30 ± 5) mm, în timp ce zona țintă trebuie să fie de cel puțin 440 x 440 mm;
- forțele de strângere trebuie să împiedice dislocarea probei în timpul testului, fără a solicita rezultatul.
În spatele specimenului de testat este instalată o cutie de depozitare a cioburilor, care este o cameră care servește la colectarea fragmentelor de sticlă separate de suprafața posterioară a eșantionului de testat și a unui glonț care a trecut prin eșantionul de testat.
Dispozitivul de măsurare a vitezei unui glonț este un sistem electronic care măsoară timpul de zbor al unui glonț între doi senzori - ținte situate la o distanță fixă de 300 ... 500 mm de-a lungul traiectoriei glonțului. Când glonțul trece prin primul senzor țintă, se formează un impuls, care pornește contorul de frecvență, care numără numărul de impulsuri generate de generatorul de înaltă frecvență al dispozitivului. Când glonțul celui de-al doilea senzor țintă trece, pulsul este oprit. Viteza glonțului este determinată prin calcul. Viteza glonțului se măsoară la o distanță de cel mult 2,5 m în fața probei de încercare. Eroarea de măsurare nu trebuie să depășească 1,0 m/s.
Atunci când un glonț lovește un obstacol, glonțul și materialul de protecție în sine sunt deteriorate: energia cinetică uriașă a mișcării glonțului se stinge din cauza deformării materialului care este comprimat și spart de acesta (deformații inelastice). Majoritatea gloanțelor (pentru mitraliere sau puști) conțin un miez greu de oțel foarte puternic, după aplatizarea carcasei, acesta pătrunde adânc în material.
Pentru a asigura curățenia testelor, în spatele epruvetei este plasată o foaie de folie metalică subțire, a cărei deteriorare poate fi folosită pentru a determina rezultatele testului. Clasa de protecție depinde nu numai de mijloacele de distrugere, ci și de cartușul și glonțul ales.
Testarea sticlei antiglonț
- armele și munițiile sunt selectate în conformitate cu clasa de protecție pentru care urmează să fie testată sticla laminată;
- înainte de încercări se trag mai multe focuri preliminare pentru a se stabili dacă viteza efectivă de impact corespunde cu cea admisibilă;
- proba este instalată în cadru cu partea atacată la armă;
- trage trei focuri la piesa de încercare în conformitate cu condițiile de încercare. Determinați viteza impactului și distanța dintre centrele celor trei impacturi cu o precizie de 1 mm;
- inspectați proba de testare pentru prezența găurilor traversante;
- verificați prezența fragmentelor de sticlă și a fragmentelor separate de suprafața din spate a probei de testat în cutia de depozitare a cioburi;
- natura înfrângerii este controlată după fiecare lovitură în funcție de starea ecranului de control și a spatelui probei;
- un lumbago este considerat a fi prin penetrarea probei de un glonț sau fragmentul acestuia;
- sticla se consideră că a trecut testul dacă nu există nicio pătrundere a ecranului de control de către un glonț sau fragmente de sticlă.
Clasificarea sticlei antiglonț pentru rezistența la gloanțe
Clasa de protectie sticla | Tip de armă | Numele și indexul cartuşului | Tip de miez de glonț | Greutatea glonțului, g | Viteza glonțului, m / s | Distanța de tragere |
---|---|---|---|---|---|---|
В1 - Prima clasă de protecție | Pistol Makarov (PM) | Cartuș pistol 9 mm 57-N-181 7,62 mm | Oţel | 5,9 | 315 ± 10 | 5 |
B2 - A doua clasă de protecție | Pistol Tokarev (TT) | cartuș de pistol 57-Н-132С sau 57-Н-134С | Oţel | 5,5 | 420 ± 10 | 5 |
B3 - A treia clasă de protecție | pușcă de asalt AK-74 | Cartuș de 5,45 mm cu glonț 7N10 | Oțel întărit termic | 3,5 | 880 ± 10 | 5-10 |
В4 - A patra clasă de protecție | pușcă de asalt AKM | Cartuș de 7,62 mm cu glonț 57-N-231 | Oțel întărit termic | 7,9 | 715 ± 10 | 5-10 |
B5 - Clasa a cincea de protecție | Pușcă de lunetist (SVD) | Cartuș de 7,62 mm ST-2M | Oțel întărit termic | 9,6 | 825 ± 10 | 5-10 |
B6 - A șasea clasă de protecție | Pușcă de lunetist (SVD) | Cartuș de 7,62 mm BZ-32 | Oţel | 10,4 | 820 ± 10 | 5-10 |
Videoclip despre sticla blindata
Videoclipul pe sticlă antiglonț a fost filmat pentru programul „Cum funcționează”.
Procesul de acoperire a interiorului sticlei unei mașini cu o peliculă groasă care oferă protecție și rezistență se numește armătură de sticlă. Această acoperire poate rezista la ciocan, liliac și alte obiecte grele. Sistemul de rezervare în sine a venit din afaceri. Cele mai vechi filme au fost inventate pentru clădirile industriale și spațiile comerciale unde este nevoie de protecție împotriva hoților și vandalilor. Din acest articol veți afla cum să aplicați singur un astfel de film, ce avantaje și dezavantaje are acest sistem și cât de eficient este.
Soiuri de film
Există diferite tipuri de filme de armură concepute pentru:
- Sticla auto. Grosimea de la 250 la 310 microni. Vânzare gratuită. Se lipește după principiul de nuanță. Va dura 1 lună să se usuce complet. După aceea, filmul rezistă la impacturi cu piatră, ciocan, liliac. El salvează o mașină și pasagerii ei de pietrele care pot zbura pe autostradă și salvează, de asemenea, jafurile.
- Clădiri de birouri. Aceeași grosime ca și filmul de sticlă auto. Potrivit pentru birouri, vitrine, ateliere, centre comerciale mari. Rolele de material sunt mult mai largi decât pentru sticla auto.
- Obiecte deosebit de importante. Grosimea este de aproximativ 550 microni. Acest lucru este necesar pentru instalațiile deosebit de importante din orice stat pentru a proteja împotriva eventualilor teroriști. O astfel de sticlă este absolut imposibil de spart și de pătruns în cameră.
- Antiglont pentru sticla auto. Rezistă la împușcături nu din toate armele de foc. Folia standard este antiglonț și poate rezista gloanțelor de calibrul 38 de la un pistol. Grosimea sticlei trebuie să fie de cel puțin 12 mm, precum și multistratificată, exact ca parbrizul unei mașini. Mașinile, această rezervare nu va putea rezista.
Oricare ar fi filmul de rezervare, este dificil să oferi o garanție 100% a durabilității. Numele „antiglont” este arbitrar. Studiile au arătat că acest pahar nu se va sparge dacă trage dintr-un pistol de calibrul specificat și în diferite părți ale sticlei. În cazul în care gloanțe de calibrul necesar lovesc în același loc, sticla va fi străpunsă și niciun film nu îl poate salva.
Avantaje și dezavantaje ale rezervării unui parbriz cu un film
Adesea, pasionații de mașini cred că nuanțarea și rezervarea mașinilor sunt legate între ele. În plus, se crede că o astfel de acoperire pe parbriz va afecta vizibilitatea și va interfera cu conducerea. Toate acestea sunt complet greșite. Principalele caracteristici și avantaje ale unui astfel de film:
- Vizibilitate de înaltă calitate;
- Nu se amestecă cu nuanțarea;
- Tolerează perfect autochimia;
- Pelicula groasă acoperă parbrizul, pelicula subțire acoperă restul;
- Acoperire cu peliculă polarizată - reducerea strălucirii;
- Distribuția uniformă a impactului;
- Protecție împotriva vandalismului minor.
De asemenea, merită să ne amintim despre faruri, care au nevoie și de protecție împotriva obiectelor străine.
Înainte de a merge la benzinărie, este important să cunoașteți dezavantajele rezervării cu film:
- Când conduceți sau parcați, praful se depune pe suprafața parbrizului. Când proprietarul mașinii pornește ștergătoarele, foliei se aplică daune semnificative prin zgârieturi. Pentru a minimiza deteriorarea, evitați praful excesiv și ștergeți mai des parbrizul.
- Bulele pot apărea oriunde. Dacă apar în fața ochilor șoferului, acesta, de regulă, va fi foarte enervant și va reduce calitatea vizibilității. În plus, aspectul mașinii are de suferit.
Prețul rezervării geamurilor auto cu o peliculă cu întunecare începe de la aproximativ 3.500 de ruble.
Rezervare DIY
Armura de sticlă este folosită de obicei de șoferii care au devenit victime ale geamurilor sparte din orice motiv: cineva din cauza pietrelor care zboară adesea de pe roți și cineva din cauza unui jaf.
Aspectul filmului este similar cu cel colorat cu cel mai înalt nivel de transparență. Îl puteți cumpăra în magazinele auto sau online. Procedura de aplicare a filmului este următoarea.
1. Este necesar să demontați geamurile laterale. Trebuie să urmați instrucțiunile în funcție de marca și modelul mașinii dvs. Ar trebui să ajungeți cu atenție la cleme și să îndepărtați sticla, înainte de aceasta, nu uitați să desfaceți cardurile ușii.
2. Îndepărtarea murdăriei și a grăsimii. Un punct important este degresarea completă a fiecărui pahar. Pentru a face acest lucru, așezați paharul pe o suprafață plană pre-curățată. Ai grijă la particulele abrazive care pot zgâria sticla. În continuare, ar trebui să curățați interiorul geamului lateral, unde va fi aplicat filmul de rezervare. Pentru curățare, puteți folosi un detergent special pentru sticlă și un șervețel fără scame. Este important să înțelegeți că orice praf sau scame, dacă rămâne brusc pe suprafața sticlei, nu va rămâne complet sub film, iar aspectul sticlei din interiorul cabinei va fi departe de a fi estetic.
3. Pregătire. Filmul în sine constă dintr-un strat adeziv și un suport protector incolor. În primul rând, măsurați paharele și tăiați cantitatea necesară de film cu o marjă.
4. Acum aplicați pe interiorul curat al paharului. Filmul trebuie poziționat astfel încât suportul să fie în partea de jos. Folosind bandă de mascare, puteți fixa perfect filmul pe sticlă. Asigurați-vă că filmul iese la cel puțin 1 cm din toate părțile.
5. Pregătirea unui agent special pentru îndepărtarea părții adezive de pe film. Pentru pregătire, trebuie să luați apă plată și săpun lichid. Proporția de 20% săpun și 80% apă. Utilizați șampon cu parfumuri și aditivi minime. În caz contrar, este mai probabil ca acești aditivi să intre într-o reacție chimică cu stratul adeziv decât se va dovedi a fi necunoscut. Soluția rezultată trebuie umplută cu un pulverizator de grădină.
6. Lipiți filmul și neteziți-l. Îndepărtați cu grijă suportul de protecție, ținând spuma doar acolo unde marginile nu vor intra în contact cu sticla. Se toarnă soluția preparată peste suprafața de sticlă și stratul adeziv al filmului. Acum ar trebui să aplicați filmul blindat cu partea lipicioasă în interiorul geamului lateral. Pe prima, filmul se va deplasa pe suprafață, acest lucru este necesar pentru a netezi neregulile folosind o mini-spatulă specială (o puteți schimba cu un card bancar). Cu mișcări simple de la centru spre margini, este necesar să eliminați toate bulele de aer. Dacă acest lucru nu se face, atunci se vor forma bule, care nu vor mai fi posibile de îndepărtat.
7. Uscarea cu un uscător de păr de construcție. După ce întregul film a fost îndreptat, acesta trebuie să fie bine uscat cu un uscător de păr. Are un t de aer mare și un jet mai subțire. Pelicula fierbinte se va întinde pe suprafață. Apoi faceți o pauză de o oră pentru ca filmul să aibă timp să se răcească.
8. Îndepărtarea excesului. Initial a ramas minim 1 cm de exces pentru ca filmul sa fie suficient. Acum că s-a așezat bine și s-a răcit, puteți tăia părțile în exces cu un cuțit de birou. Cel mai bine este să țineți cuțitul la un unghi de 45 de grade. De asemenea, este indicat să țineți filmul cu o spatulă.
Uscarea finală durează mai mult de o zi. Cel mai înalt grad de protecție va apărea într-o lună. Pe baza experimentelor, este posibil să spargeți sticla doar cu 4-5 lovituri într-un singur loc cu un obiect greu.
Rezervare geamuri auto cu film (video)
Rezultat
Astfel, blindajul geamurilor mașinii cu o peliculă protejează foarte bine nu numai de obiectele străine care zboară de sub roți, ci și de posibili hoți și vandali. Dar, de regulă, proprietarii de mașini încep să se gândească la asta numai atunci când se întâmplă așa ceva și geamul este deteriorat.